Hitachi HF-W6500 60 Manual page 157

8. SIMULATING THE HARDWARE STATUS
● Memory
No. Current status
1 Normal
2 Error
3 Failure
4 Not Mounted
（*1）
In the case of this equipment, the equipment never starts with the
DIMM A2 not being mounted, and consequently, "Not Mounted" is
not displayed for the DIMM A2 on the popup menu.
（*2）
Memory state "Error" indicates a state in which the occurrence
frequency of memory error correction is high, while "Failure"
indicates a state where memory error correction continues to occur.
●
General purpose external contact input status
No. Current status
1 Open
2 Close
●
General purpose external contact output status
No. Current status
1 Open
2 Close
Since the status is only display of the control results by the general-
(*）
purpose external contact output control function (GendoControlEx),
the pop-up menu status will be "None".
Statuses in the popup menu
Normal, Error, Failure,
Not Mounted
Statuses in the popup menu
Open, Close
Statuses in the popup menu
none
8-14
Note
(*1)
(*1) (*2)
(*1) (*2)
(*1)
Note
Note
(*)
(*)