Hitachi HF-W6500 60 Manual page 145

8. SIMULATING THE HARDWARE STATUS
The monitoring function of the RAS software detects change in the simulated hardware
status and general purpose external contacts status and notifies the change through various
interfaces.
For information about the interfaces used for notification, see the following sections in
this manual.
・Fan condition:
・Temperature condition inside the chassis:
・Drive condition:
・Memory condition:
・RAID status:
・
general purpose external contact input status
・general purpose external contact output status：
While the equipment is running in simulation mode, monitoring of the actual
hardware status is disabled. Errors including fan failure and abnormal
temperature cannot be detected. You must never use this equipment in
simulation mode for business use. Use the simulation function only for testing a
user application and checking the notification interface of the RAS software.
"2.1 Fan Monitoring"
"2.2 Monitoring Temperature inside the Chassis"
"2.3 Drive Failure Prediction Function (SMART Monitoring)"
and "2.4 Drive Usage Monitoring"
"2.5 Memory Monitoring"
"2.8 RAID Monitoring [B/T Model only]"
"6.1.5 Get functions for the general purpose external contact
inputs (2) Function interface (GetGendiEx)"
"4.5 Remote Notification"
"6.1.4 Control functions for the general purpose external
contact outputs(2) Function interface (GendoControlEx)"
"4.5 Remote Notification"
NOTICE
8-2
：