Hitachi HF-W6500 60 Manual page 51

3. SETTING UP THE RAS FEATURE
2. Keys
For a key, specify the line number of a line displayed as a part of the popup message.
In this function, you can use the keys "Line1" through "Line5" for each section.
If you specify other than "Line1" through "Line5" and so on for keys, those keys are
ignored.
3. Values
Specify one line of message displayed as a part of the popup message for a value.
For each key, a maximum of 50 bytes of characters (up to 25 double-byte characters)
can be assigned. If you specify more than 50 bytes of characters, the characters at the
51th byte and after are ignored.
If the line includes space characters, the whole value should be enclosed in double
quotation marks (""). If the value is empty, it is treated as a newline character.
NOTE
• When you save the change, make sure you use Save in the menu. Otherwise,
the change you made may not be saved properly.
• While you are editing a message definition file, do not use another application
to edit the same file. If you edit a message definition file from multiple
applications at the same time, the change may not be saved properly.
• When you edit a popup notification message, make sure that the message
clearly states that an error occurred. If you continue to use this equipment
while error remains, your system may be affected significantly.
3-16