Advertisement
PRECAUTIONS
•
Do not charge the transceiver and battery pack when they are wet.
•
Ensure that there are no metallic items located between the
transceiver and the battery pack.
•
Do not use options not specifi ed by KENWOOD.
•
If any transceiver part is damaged, do not touch the damaged parts.
•
If a headset or headphone is connected to the transceiver, reduce
the transceiver volume. Pay attention to the volume level when
turning the squelch off.
•
Do not place the cable of the clip microphone with earphone/hanger
around your neck while near machinery that may catch the cable.
•
Do not place the transceiver on unstable surfaces. If the transceiver
switches OFF/ON as a result of falling or hard impact, the volume
and channel confi gurations may reset.
•
Ensure that the end of the antenna does not touch your eyes.
•
Do not immerse the transceiver in water.
•
Always switch the transceiver power off before installing optional
accessories.
•
The charger is the device that disconnects the unit from the AC
mains line. The AC plug should be readily accessible.
•
To dispose of batteries, be sure to comply with the laws and
regulations in your country or region.
•
If a commercially available neck strap is used, take care not to let
the strap get caught on nearby machine.
ii
Advertisement
