Kenwood PKT-23 Easy Programming Instructions

Kenwood PKT-23 Easy Programming Instructions

Uhf ultra small compact portable radio
Hide thumbs Also See for PKT-23:

Advertisement

PKT-23
UHF Ultra Small Compact Portable Radio
EASY PROGRAMMING INSTRUCTIONS
Kenwood U.S.A. Communications Sector
Copyright © 2013 JVC KENWOOD Corporation All rights reserved.

Advertisement

Table of Contents
loading

Summary of Contents for Kenwood PKT-23

  • Page 1 PKT-23 UHF Ultra Small Compact Portable Radio EASY PROGRAMMING INSTRUCTIONS Kenwood U.S.A. Communications Sector Copyright © 2013 JVC KENWOOD Corporation All rights reserved.
  • Page 2 ■ PKT-23 Portable 1.5W - 99 UHF BRS Frequencies Preprogrammed Ultra Small Compact Radio  1.5W / 0.5W Transmit Power  4 channels  99 Pre-Programmed UHF Frequencies  QT (39) and DQT (168) Coded Squelch  2 Programmable Function Keys ...
  • Page 3: Key Features

    Talk Range Powerful Operation Open area Up to 5.0miles w/o obstructions (8 km) ■ PKT-23 offers 1.5 watts of power, providing a Residential areas Up to 1.5miles (near building) (2.4 km) coverage area up to 5 miles for direct radio-to-radio communication.
  • Page 4: Basic Operation

    ■ Basic Operation ❶ Power Switch Hold for 2 seconds to turn the radio power ON and OFF. Momentarily press while the radio is ON to see the Battery Level Guide. ❷ PTT Switch BASIC Press and hold, then speak into the microphone to transmit. ❸...
  • Page 5 ■ Basic Operation Operations (Volume Range 0 ~ 7) 1. Press Up key for volume Up. 2. Press Down key for volume Down. Indications BASIC 1. Beeps according to volume level. 2. Max./Min. tone beeps at the limit. Operations 1. Press PF2 Key. 2.
  • Page 6 ■ Basic Operation Operation (ON) 1. Press PF1 key to enable SCAN. Indications 1. Single beep sounds. 2. Green LED blinks while SCAN is ON. Operation (OFF) BASIC 1. Press PF1 key to disable SCAN. Indications 1. Double beeps sound. 2.
  • Page 7 ■ Self Programming Mode Self Programming Timer is 20 seconds Mode Entry 1. Hold PWR + PF2 + UP to enter the mode. Indications 1. Yellow LED lights. 2. Announces “Setup” Operations 1. Use the [Up]/ [Down] keys to select the key assignment from the table.
  • Page 8 ■ Self Programming Mode Self Programming Timer is 20 seconds Mode Entry 1. Hold PWR + PTT + UP to enter the mode. Indications 1. Yellow LED lights. 2. Announces “Self” + “Channel One” Operations 1. Use the [Up], [Down] keys to select the channel.
  • Page 9 ■ Self Programming Mode Self Programming Timer is 20 seconds Mode Entry 1. Hold PWR + UP to enter the mode. Indications 1. Yellow LED lights. 2. Announces “VOX” Operations 1. Use [PF1] key to increase the vox gain level and voice will announce the level (Total 5 level).
  • Page 10 ■ Self Programming Mode Self Programming Timer is 20 seconds Mode Entry 1. Hold PWR + PF2 + DOWN to enter the mode. Indications 1. Yellow LED lights. 2. Announces “CLONE” Operations 1. Use the [Up], [Down] keys to select clone frequency from the Frequency Table.
  • Page 11 ■ Self Programming Mode Self Programming Timer is 20 seconds Mode Entry 1. Hold PWR + PTT to enter the mode. Indications 1. Yellow LED lights. 2. Announces “Confirm” Operations 1. Use the [Up], [Down] keys to select the channel for the channel information. Channel Information: SELF PROGRAMMING [Channel Table # + QT/DQT Table # + VOX*]...
  • Page 12 ■ Self Programming Mode Self Programming Timer is 20 seconds *Bandwidth is all 12.5 kHz Table Frequency Table Frequency Table Frequency Table Frequency Channel Table Frequency (MHz) (MHz) (MHz) (MHz) (MHz) 464.5000 462.8375 467.8875 452.7625 464.5500 464.5500 462.8625 467.9125 452.8625 467.9250 467.7625 462.8875...
  • Page 13 ■ Self Programming Mode Self Programming Timer is 20 seconds D023N D205N D465N D031I D243I D506I 114.8 192.8 D025N D223N D466N D032I D244I D516I 71.9 118.8 203.5 D026N D226N D503N D043I D245I D532I 74.4 210.7 D031N D243N D506N D047I D251I D546I 127.3 218.1...

Table of Contents