Advertisement
This transceiver allows you to reprogram the PF-1 key (press/
hold) and PF-2 key (hold only) with any of the functions listed
in the table below. Explanations on the use of each function are
provided under "PROGRAMMABLE FUNCTIONS", on page 20.
Table Number
0
1
2
3
4
5
6
To change the functions of the PF-1 and PF-2 keys:
1 With the transceiver power OFF, press and hold the Up and
PF-2 keys while turning the transceiver power ON.
•
Continue to hold the Power switch, Up key, and PF-2 key until
the LED indicator lights yellow and the transceiver announces
"Setup".
2 Release the Power switch, Up key, and PF-2 key.
•
The transceiver announces "Table Zero".
3 Press the Up/Down keys to increment/ decrement the
number, to select the new key function.
•
Table numbers and their corresponding functions are provided
in the table above.
•
A voice announcement will inform you of the currently selected
Table number.
KEY ASSIGNMENT MODE
None (no function)
Calling Alert
Key Lock
Monitor
Scan
Squelch Off
Super Lock-P
Function Name
19
Advertisement
