System information
Displays the system information of the projector.
SYSTEM INFORMATION
ROM VERSION:
SET RUNTIME:
LAMP1 RUNTIME:
LAMP2 RUNTIME:
INPUT BOARD:
NUMBER OF
ENTRY SIGNAL:
ENTER: NEXT
• Pressing the "ENTER" button will move on to the next
page.
SYSTEM INFORMATION
ROM VERSION:
ON COUNT
POWER ON TIMES:
LAMP 1 ON:
LAMP 2 ON:
AUX:
NUMBER OF
ENTRY SIGNAL:
ENTER: NEXT
Video setting
This feature allows the user to select the signaling
system according to the connected device.
Select "VIDEO SETTING" from the
"OPTION" screen and press the ENTER
button.
The "VIDEO SYSTEM" screen will be displayed.
Use the
buttons to select "AUTO
1" or "AUTO 2".
• When ET-MD95VM2 (optional) is
Note
mounted, an item of "VIDEO SELECT" will
appear on the "VIDEO SETTING" screen
allowing the used to select either "LINE or
Y/C" or "YC
VIDEO SYSTEM
"AUTO1": The system is automatically selected from
among NTSC, PAL, SECAM, NTSC4.43 and
PAL60.
"AUTO2": The system is automatically selected from
among NTSC, PAL-M and PAL-N.
1.00
14h
13h
13h
NOT YET
4/96
1.00
55
57( 0)
59( 0)
NOT YET
4/96
C
".
b
r
AUTO 1
AUTO 2
Fan control
When using the projector over 1 400 m (4605.3')
above sea level, set to "High".
FAN CONTROL
Automatic adjustment
(Only for RGB input)
Use this setting when adjusting a specific or oblong
(16:9, etc.) signal.
Press the MENU button.
The MAIN MENU screen will be displayed.
Select "OPTION" with the
buttons.
Press the ENTER button.
The OPTION screen will be displayed.
Using the
SETUP".
Press the
The AUTO SETUP screen will be displayed.
Using the
desired mode.
"STANDARD":
to receive signals of which
image aspect is 4:3 or 5:4
"WIDE":
to receive signals of which
image aspect is 16:9 (oblong)
"USER":
to receive signals of specific
horizontal resolution (number of
horizontally displayed dots)
MODE
Applicable resolution
640 x 400, 640 x 480, 800 x 600, 832 x
624, 960 x 720, 1 024 x 768, 1 152 x 864,
STANDARD
1 152 x 870, 1 280 x 960, 1 280 x 1 024,
1 600 x 1 200
720 x 400, 848 x 480, 1 280 x 720,
WIDE
1 120 x 750, 1 376 x 768, 1 600 x 1 024
If "USER" is selected, enter the
horizontal resolution of signal source
into "number of horizontally displayed
dots" using
Press the ENTER button.
Execute automatic adjustment.
A message "EXECUTING..." appears during
automatic adjustment.
When the adjustment is complete, the system
returns to the input screen.
NORMAL
HIGH
buttons, select "AUTO
buttons.
buttons, switch to the
buttons.
73