Sub Memory - Panasonic PT-D7500U Operating Instructions Manual

Dlp based projector
Hide thumbs Also See for PT-D7500U:
Table of Contents

Advertisement

Registration of input signal data

Sub memory

The projector is provided with a sub memory function to register plural pieces of image adjustment data even they
are determined to be the same signal by the frequency and form of the synchronization signal source.
Use this function when the user needs adjustment of picture quality such as aspect switching and white balance
using the same signal source.
Sub-memory contains all data that can be adjusted by signals such as screen aspect ratio and image adjustment
data (BRIGHT, CONTRAST etc.).
How to register into sub memory
A new signal cannot be registered into sub memory. A new signal must undergo signal registration.
SUB MEMORY LIST
1- 1:MAC16-A1
1- 2:MAC16-A2
1- 3:
– – –
1- 4:
– – –
1- 5:
– – –
1- 6:
– – –
1- 7:
– – –
1- 8:
– – –
:SELECT
ENTER:REGISTER
REGISTER SUB MEMORY?
NAME:
MEMORY NO:
S.S.NO:
INPUT NO:
fH:
fV:
SYNC. STATE:
ENTER:EXECUTE
MENU:ESC
Procedure to switch to sub memory
Press the USER button or the
The screen will show a list of the sub-memory registered for the currently entered signal.
In the "Signal List", select the sub-memory signal to be switched using the
and
buttons.
Press the ENTER button.
Signal will be switched to the one that was selected in Step
How to erase sub memory
The currently selected SUB MEMORY is deleted by pressing the standard button (STD) at the "REGISTERED SIGNAL
LIST" or the "SUB MEMORY LIST".
46
MAC16-A1
– –
– – –
RGB1
48.00kHz
60.00Hz
H(POS)
V(POS)
and
Press the USER button or the
buttons on normal screen (menu is not
displayed).
(A "Check sub-memory registration" screen will
appear if sub-memory has not been registered.)
The screen will show a list of the sub-memory
registered for the currently entered signal.
Select the SUB MEMORY number
stored with the
buttons in the "Signal List".
Press the ENTER button.
A "Change registered signals" screen will appear.
If the user wants to use the name
automatically displayed without
change, do the same as in Step
buttons on normal screen (menu is not displayed).
.
and
,
,
and
.
,
,

Advertisement

Table of Contents
loading

This manual is also suitable for:

Pt-d7600uPt-d7600ue

Table of Contents