Electrolux HHOB760S User Manual page 9

INTEGRATED INSTALLATION
Find the video tutorial "How to install your
Electrolux Extractor Hob 70 cm" by typing out
the full name indicated in the graphic below.
How to install your Electrolux
Extractor Hob 70 cm
Filter housing assembly
Before the first use make sure to insert the
long life carbon filters inside the housing with
the handles facing inwards. Refer to
"Cleaning the hood filters". Once the filter
housing is assembled, put it inside the hood
system and place the grid on the hood.
3.5 Connection cable
• The hob is supplied with a connection
cable.
• To replace the damaged mains cable, use
the cable type which withstands a
temperature of 125 °C or higher.
• The single wire must have a diameter of
minimum 1,5 mm².
• Speak to your local Service Centre. The
connection cable may only be replaced by
a qualified electrician.
WARNING!
All electrical connections must be made
by a qualified electrician.
www.youtube.com/electrolux
www.youtube.com/aeg
ENGLISH 9