Advertisement
Towel warmer
Instruction manual
Model OD-1106-AL
SPECIFICATION
Voltage: AC 120V Frequency: 60Hz
Rated power: 130 W
This towel warmer is intended for bathroom. Read the instructions carefully
before using.
Please use the services of a certified
electrician for the hardwire
installation of this product.
Plug the power cord into an electrical
outlet for product testing before
using.
For the apparent wire installation of
this product, please verify that the
jonction box gives 120 V.
The drying temperature can be set
between 30° and 60 degrees Celsius
(86 to 140 °F).
The timer can be set between 1 hours
to 8 hours. Touch the screen to
select the duration of the drying.
The towel warmer must not work
without being tented. Please turn it
off and take the plug out from the
outlet if it is not being use.
Advertisement
Table of Contents
Related Manuals for odass OD-1106-AL
Summary of Contents for odass OD-1106-AL
- Page 1 Towel warmer Instruction manual Model OD-1106-AL SPECIFICATION Voltage: AC 120V Frequency: 60Hz Rated power: 130 W This towel warmer is intended for bathroom. Read the instructions carefully before using. Please use the services of a certified The drying temperature can be set...
- Page 2 Freestanding installation 1. Towel rack 2. Foot base 3. Timer. Press the button to turn it on or off, select a time of 1 hour to 8 hours and the temperature. 4. Cable 5. Use the screws to secure the support. Wall Installation 1.
- Page 3 Odass warrants for a period of 5 years, sa- transferred to a third party and additional installation fees. Odass cannot be held responsible nitary porcelain products (toilet, lavatorie basins) limitations apply for commercial use.
Need help?
Do you have a question about the OD-1106-AL and is the answer not in the manual?
Questions and answers