Activate/Deactivate Time Alarm; Snooze Alarm; No Wwvb Tower Icon; Time Is Off By Hours - La Crosse Technology 308-1425B Faqs

In normal mode, hold the ALARM button for three seconds to enter alarm set mode.
1. HOUR: The Hour will flash, use the ▲ or ▼ buttons to set the hour, and press ALARM
button to confirm and switch to minutes.
2. MINUTES: The Minutes will flash, use the ▲ or ▼ buttons to set the minutes, and press
ALARM button to confirm and exit.
Note: When no buttons are pressed for ten seconds, the weather station will save the last
change and default back to normal mode

Activate/Deactivate time alarm

 In normal mode, press and release the ALARM button once to show alarm time.
 Press and release the ALARM button repeatedly to turn ON/OFF alarm.
 The alarm icon
 Note: The alarm will ring for 2 minutes then turn off if no buttons are pressed.

Snooze Alarm

 When the alarm sounds, press the HI/LOW/OFF button to snooze the alarm for 10
minutes.
 The snooze option can repeat three times.
 The alarm icon
 Note: while the alarm sounds press any button except the ALARM button to turn the
alarm off.

No WWVB Tower Icon

 The forecast station has not received a WWVB time signal in the past 24-hours.

Position the forecast station for better reception.
 Be sure you have good batteries in the forecast station.
 Hold the + and – buttons together to send the forecast station on a signal search at night.
 Allow up to 5 nights to receive the time signal.

Time is off by hours

 Check to see if the
WWVB
not received a WWVB time signal in the past 24-hours.
 Reposition the forecast station with the front or back facing Colorado.
 Check that the Time Zone selected correctly reflects your location. Adjust the time zone in the
Program Menu.
 Check that the DST indicator is correct for your location (most areas observe DST so this should be
ON). Adjust the DST indicator in the
Manually Set Time/Date: Program Menu
The TIME SET button will move through the program menu. To change a value use the
ARROW buttons.
1. WWVB ON/OFF: Hold the TIME SET button five seconds so WWVB and the word ON
will flash. Press and release either ARROW button to turn this to OFF if you do not wish
WWVB time reception. Confirm with the TIME SET button and move to time zone.
2. TIME ZONE: EST will flash. Press and release the ▲ or ▼ buttons to select a different
Time Zone: AST=Atlantic, EST= Eastern, CST= Central, MST= Mountain, PST= Pacific,
AKT= Alaska, HAT=Hawaiian time zone. Confirm with the TIME SET button and move to
DST.
La Crosse Technology, Ltd.
appears when alarm is active.
will flash while the snooze feature is active.
Tower icon appears on the forecast station. If not, the forecast station has
Program Menu.
www.lacrossetechnology.com/support Page 10