BRAND-MAN Bronco2 Owner's Manual page 5

ASSEMBLY INSTRUCTIONS
Step 1
Step 2
F ST4.2*10 (X4)
DO NOT RETURN TO PLACE OF PURCHASE.
For assistance, call 1.855.200.8445 toll-free. Please have your owner's manual and
model number available for reference.
Note: The model number is printed on a label which can be found on the side of the
Assembly Tips:
1. Select an area where you will assemble this product. To protect components, choose
a smooth surface that's free of cracks or openings.
2. Spread out all parts.
go back and fully tighten all hardware.
Be careful not to over-tighten. That could damage surfaces or strip threads.
4. For best results, complete each step in the order presented.
To complete assembly you will need:
• (1) Leak detection solution (instructions on how to make the solution are
included in the "Operating Instructions" section of this manual).
connection.
Typical assembly is approximately one hour.
CAUTION: Two (2) people are required for assembly.
a) Attach the Leg seat(19) to the Left front(23) and rear(24) foot with 2 Tapping
screws(F) each.
23
24
F
19
THREE BURNERS
BARBECUE
BG2046A3
F
4