BRAND-MAN Bronco2 Owner's Manual page 23

CLEANING AND CARE
First Use
1. Light Barbecue per "Lighting" section.
2. Keep burners on and
3. Turn Barbecue o per "Turning O " section.
4. Allow Barbecue to cool, but still be slightly warm.
5. Wipe o Barbecue surface, inner and outer walls with paper towels until clean.
Note: While drying you may notice the towel may have some discoloration. This is normal.
6. Apply nishing oil onto Barbecue surface, inner and outer walls and evenly coat with rolled up paper towels.
7. Repeat this process at least twice.
After Each Use
1. Turn Barbecue o per "Turning O " section.
2. While the Barbecue is still warm, gently scrape o all food residue with a scraper.
3. Wipe down Barbecue surface, inner and outer walls with a towel or paper towels.
4. For stubborn food residue:
a. Light Barbecue per "Lighting" section.
b. Apply cooking oil onto Barbecue surface.
c. Allow oil to "boil" food residue o .
d. Repeat steps 1 through 3.
e. If necessary, use a BBQ stone and scrub the food residue o .
f. Continue with "Seasoning Barbecue" instructions.
5. Wipe o Barbecue surface, inner and outer walls with paper towels until clean.
Note: While drying you may notice the towel has some discoloration. This is normal.
6. Apply nishing oil onto Barbecue surface, inner and outer walls and evenly coat with rolled up paper towels.
7. Light Barbecue per "Lighting" section.
8. Keep burners on and (HIGH) for 15 minutes or until nishing oil starts to smoke.
9. Turn Barbecue o per "Turning O " section.
10. Repeat steps 6-9 a minumum of 2 additional times.
11. Following "Before Storing" section.
Refurbish the Barbecue Surface
1. If Barbecue is o , light per "Lighting" section for 10 minutes. Then turn Barbecue o per "Turning O " section.
2. If Barbecue is on, turn Barbecue o per "Turning O " section.
3. While the Barbecue is still warm, use a scraper or metal spatula to remove as much rust and food residue as you
can from the Barbecue surface, inner and outer walls.
4. Apply a liberal amount of cooking oil onto the Barbecue surface.
5. Using a BBQ stone, scrub the Barbecue surface. Apply additional cooking oil as need.
6. Wipe o Barbecue surface, inner and outer walls with paper towels.
7. Repeat steps 3-5 until paper towels no longer show any rust.
8. Apply nishing oil onto Barbecue surface, inner and outer walls and evenly coat with rolled up paper towels.
9. Light Barbecue per "Lighting" section.
10. Keep burners on
11. Turn Barbecue o per "Turning O " section.
12. Repeat steps 7-10 until the surface has a nice dark color.
13. Following "Before Storing" section.
(HIGH) for 15 minutes.
and (HIGH) for 15 minutes or until nishing oil starts to smoke.
THREE BURNERS
BARBECUE
BG2046A3
22