BRAND-MAN Bronco2 Owner's Manual page 12

ASSEMBLY INSTRUCTIONS (CONTINUE)
Step 15
H HINGE-AXIS (X2)
I WAVE PIN (X2)
Step 16
a) Align the hinges and put the prepared Lid(6) onto the Firebox(13)
b) Insert the Hinge Axis(H) through the hinges with Wave pin(I) as shown below.
c) Ensure the Hinge Axis(H) pass through all the holes.
a) Place the Warming rack (7) into the rebox as shown below, putting the prongs into the
hood rst(you may have to slightly bend it at this stage)
7
THREE BURNERS
BARBECUE
BG2046A3
1
H
2
I
11