Sensor Controls - Miele DGC7860 Operating And Installation Instructions

Controls

Sensor controls

The sensors react to touch. Every touch on the sensors is confirmed by a keypad
tone. This keyapd tone can be switched off by selecting the
Off setting.
If you want the sensor controls to respond even when the steam oven is switched
off, select the Display
Sensor





26
| QuickTouch |
Function
If you want to control the steam oven from your mobile device,
you must have the Miele@home system, switch on the
control setting and touch this sensor. The sensor then lights up
orange and the MobileStart function is available.
As long as this sensor is illuminated, you can control the steam
oven via your mobile device (see "Settings – Miele@home").
Depending on which menu you are in, this will take you back a
level or back to the main menu.
Use this sensor to open and close the control panel (see
"Description of the functions - Control panel").
If a menu appears in the display or if a cooking programme is in
progress, you can use this sensor to set a minute minder (e.g.
when boiling eggs on the cooktop) or an alarm (a specific time)
at any point (see "Alarm + minute minder").
Select this sensor to switch the oven interior lighting on and off.
Depending on the setting selected, the oven interior lighting
switches off after 15 seconds or remains constantly switched on
or off.
On setting.
Volume | Keypad tone
Remote
|