6.2.2.5. Installation of Mount Contact Unit.
1. Connect FPC of Mount Connect Unit to connector.
2. Installation Lens P.C.B. Unit with Mount Contact Unit.
3. Tighten 3 screws (E) in numerical order by using the torque driver with specified torque.
Lens P.C.B. Unit
Mount Contact Unit
Screw Order
Torque
4. Connect FPCs to 5 connectors of Lens P.C.B. Unit.
Connector
① → ② → ③
6.0 ± 0.5 N ・cm
Lens P.C.B. Unit
Screw (E)
③
Connector x 5
20
①
②
Screw (E) x 3