1.1 Introduction
This manual explains how to install and configure your AMP300 device. It explains also how to install a third party APK and make a AQS operating
system upgrade.
Content of the package
Items
Device
USB-A to USB-C cable
Leaflet
¹
for
AQS
Android Qeedji System
Recommendations and warnings
This device is designed to be used indoor and can work 24/7.
The device is delivered without a power supply unit. Depending on your needs,
chapter §
Power
supply.
Before supply the AMP300 device with the USB connector of your computer, check with your computer's manufacturer that the USB
◬
connectors is suitable to deliver a sufficient power.
In case you had to remove the micro SD card, ensure first that the AMP300 device is powered off before removing or inserting the micro SD
◬
card. In case of bad handling, the micro SD card replacement would not be covered by the warranty.
This device is a Class A device. In a residential environment, this device may cause radio interference. In this case, the user is asked to take
appropriate measures.
☛ In this documentation, the unit of measurement for dimensions is done in millimeters followed by its equivalent value in inches.
Description
AMP300 device with
¹ embedded
AQS
Lenght: 25 cm (9,84 ")
Instruction guide
Qeedji
6
is explaining different ways to install your device in the
Quantity
1
1
1