Device Configuration By Script - Qeedji AMP300 User Manual

2.1.3 Device configuration by script
☛ The device can be configured with a
allowing to set some preferences values allowing to configure the device. For further information, refer to the chapter
The device configuration by script can be done by different ways:
Device configuration by USB,
Device configuration by WebDAV,
Device configuration by server TFTP and server DHCP with code
Configuration script
The list of the functions supported in the script are shown in the release note
The configuration script can be also downloaded at this location.
Rename the configuration script according to the supported filename pattern:
common for multiple AMP300 devices:
,
configuration.js
,
000000000000.js
for a specific AMP300 device:
<device_LAN1_MAC_address>.js
Edit the configuration script. To customize it according to your needs, uncomment one of the available functions in the
section by removing the
configuration
For example:
/** --------------------------------------
* ---- BEGIN of the user configuration
* ---------------------------------------*/
enableExternalStorageCopyApk(); /* default mode */
//disableExternalStorageCopyApk();
/** --------------------------------------
* ---- END of the user configuration
* ---------------------------------------*/
☛ The number of supported functions can depend on the configuration script version.
configuration script. When it is properly customized and loaded in the device, this configuration script is
with the format
ABCDEFABCDEF.js
comment symbol.
//
66.
Configuration script release
.
37
Configuration script.
note.
BEGIN of the user