1. Manuals
  2. Brands
  3. Qeedji Manuals
  4. Media Player
  5. AMP300
  6. User manual

Qeedji AMP300 User Manual

Hide thumbs Also See for AMP300:
Table of Contents

Advertisement

Quick Links

Download this manual
User manual
AMP300
9.10.14 002A

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the AMP300 and is the answer not in the manual?

Questions and answers

Related Manuals for Qeedji AMP300

Summary of Contents for Qeedji AMP300

  • Page 1 User manual AMP300 9.10.14 002A...
  • Page 2 Product information Product design and specifications are subject to change at any time and `Qeedji` reserves the right to modify them without notice. This includes the hardware, the embedded software and this manual, which should be considered as a general guide to the product. The accessories supplied with the product may differ slightly from those described in this manual, depending on the developments of the various suppliers.

  • Page 3: Table Of Contents

    Part V : Technical information Technical specifications Antenna return loss Conformities Part VI : Contacts Contacts Part VII : Appendix Appendix: Qeedji PowerPoint publisher for Media Players Appendix: ISO image burning with BalenaEtcher Appendix: TFTP and DHCP server configuration Appendix: Timezone...
  • Page 4 Appendix: Device network disk mounting in MS-Windows explorer Appendix: USB mass storage Appendix: File transfer from a computer Appendix: Remove an App with Android settings Appendix: 802.1X security configuration with Android settings Appendix: Certificates installation with Android settings 7.10 Appendix: Power manager and Screen Saver modes 7.11 Appendix: Factory reset 7.12...

  • Page 5: Part I : Description And Installation

    Description and installation Part I...

  • Page 6: Introduction

    1.1    Introduction This manual explains how to install and configure your AMP300 device. It explains also how to install a third party APK and make a AQS operating system upgrade. Content of the package Items Description Quantity Device AMP300 device with ¹...

  • Page 7: Labelling

    ☛ FCC certification in pending. ☛ The QR code on the product label is corresponding to the product identification URL, for example: http://i.qeedji.tech?model=AMP300&sn=01540-00001&mac.lan1=00-1C-E6-02-52-63&mac.wlan1=00-1C-E6-02-52-64&mac.wpan1=00-1C-E6-02-52-65 Packingbox label This is the label stuck also on the packingbox. It is showing:...

  • Page 8: Product Faces

    1.3    Product faces Device's front face : USB-C connector supporting power, POWER IN : RJ45 connector for network connectivity and PoE supply, LAN/PoE Tapped hole allowing to lock the USB-C cable on the USB-C connector, POWER IN : hole hidding a push button allowing to reboot the device or doing a custom action. Device's up face Drilled holes for fixing the device with screws or cable ties.
  • Page 9 Device's rear face : USB-C connector supporting power & data USB 2 : USB-C connector supporting display port ¹, power & data, USB 1 connector, HDMI OUT connector with its micro SD card, microSD Tapped hole allowing to lock the USB-C cable on the connector USB 2 Tapped hole allowing to lock the USB-C cable on the...

  • Page 10: Device Dimensions

    1.3.1    Device dimensions...

  • Page 11: Device Fixture

    1.3.2    Device fixture...

  • Page 12: Power Supply

    For this installation way, the display device must support a connector and a connector. USB-A HDMI The AMP300 device is powered by the display device. The display device is powered by mains supply. The display device receives its video signal via . The network connection is HDMI Wifi Ethernet...
  • Page 13 For this installation way, the display device must support for over DisplayPort Alternate Mode USB-C The AMP300 device is powered by the display device. The display device is powered by mains supply. The display device receives its video signal via . The network connection is USB-C Wifi...
  • Page 14 , and be powered by DisplayPort Alternate Mode USB-C USB-C The AMP300 is powered by . The display device is powered by AMP300 via . The display device receives its video signal via . The PoE+ USB-C USB-C network connection is...

  • Page 15: Device Start-Up Steps

    1.5    Device start-up steps This is an example of device start-up steps timings. Step 1 (T0 = 0 s) Step 2 (T ~ 2  s) Step 3 (T ~ 9  s) Step 4 (T ~ 26  s) Step 5 (T ~ 31  s) The device is supplied.

  • Page 16: Led Behaviour

    Off. Sequence of 3 consecutive short red flashes of 300 ms, periodic in alternance with 4 seconds Error: the CPU can not start. If the problem persists, contact support@qeedji.tech. Off. Sequence of 4 consecutive short red flashes of Error: an internal issue has been detected during power sequencing. If the device is...

  • Page 17: Connectors Pin-Out

    Information type Value Type USB type-C Power USB PD (Power delivery) This is the USB-C pin-out for the AMP300: POWER IN ☛ The device can be supplied by the USB-C connector. POWER IN USB 1 USB-C connector Information type Value...
  • Page 18 Type USB type-C Data USB 2.0 Power USB PD (Power delivery) This is the USB-C pin-out for the AMP300: USB 2 ☛ The device can be supplied by the USB-C connector. USB 2 LAN/PoE connector Ethernet RJ-45, 10/100/1000 BaseT, PoE/PoE+.
  • Page 19 This connector is used to connect a monitor or a video projector. ☛ The audio is output on the video connector on which the display device is plugged. ☛ If the AMP300 is plugged on a HDMI audio amplifier device, the device can be used as audio media-player. Micro-SD card The micro SD card connector is located on the rear face of the AMP300.
  • Page 20 Step 2: Glide the micro SD card in the right sense with the hand towards the micro SD card connector until you feel the spring. Step 3: When the spring of the SD card connector is responding properly, helped with a pen, push the micro SD card towards the connector until hearing a clic.
  • Page 21 The 16 GB micro SD card, containing the for AMP300 device, is provided by default and is already installed in the product. The micro SD card is partitioned to be compliant with . This is the micro SD card partition mapping:...

  • Page 22: Test Card

    App is executed at device start-up for one minute, the other App cannot be executed and the user cannot access to AQS Test card desktop by pressing on the system button On a AMP300 device, the test pattern content is displayed thanks to a App that is launched at device start-up when the Test Card Test card activated in the device configuration Web user interface.

  • Page 23: Part Ii : System Configuration

    System configuration Part II...

  • Page 24: Introduction

    2.1    Introduction To support the APK deployment, the AQS operating system version upgrade and the AMP300 device configuration update, the AMP300 device embeds service which is launched automatically as soon as the AQS is running. It supports: Qeedji System APK installation thanks to a file:...

  • Page 25: Aqs Operating System Upgrade With A Fqs Firmware

    Web user interface, putting the firmware on an USB storage device then by inserting it in the AMP300 USB-C connector (USB 1 or USB 2). For further .fqs information, refer to the chapter §...
  • Page 26 This message is then displayed until the USB storage device is unplugged. Unplug the USB storage device. ☛ Once the USB storage is unplugged, the operating system upgrade duration is depending on the firmware content. It can be for .fqs example: 8 minutes and 30 seconds.
  • Page 27 This message is then displayed showing that the firmware is being installed. .fqs ☛ The installation duration is depending on the firmware version. .fqs After the firmware installation, the device is rebooting automatically once. This message is displayed while the device has not yet restarted. .fqs...
  • Page 28 Prerequisite: a WebDAV client (CarotDAV or BitKinex for example) is installed on your computer or the AMP300 device is mounted as a disk on the MS-Windows explorer. For further information, refer to the chapter § device network disk mounting in MS-Windows explorer.
  • Page 29 This message is then displayed showing that the firmware is being installed. The installation duration is depending on the version. After the version installation, the device is rebooting automatically once. This message is displayed while the device has not yet restarted. ☛...
  • Page 30 firmware is corrupted or when the USB storage device has been removed when the copy was still .fqs in progress. If required, download again the firmware from the Qeedji Website and try again. If the problem persists, contact .fqs support@qeedji.tech.

  • Page 31: Apk Deployment

    Web user interface, putting an file on an USB storage device then by inserting it in the AMP300 USB-C connector (USB 1 or USB 2). For further information, refer .apk to the chapter § APK version upgrade by USB.
  • Page 32 ☛ The necessary rights for each APK are temporarily granted during the APK installation. Copy the file at the root directory of an USB storage device and insert it on the USB-C connector (USB 1 or USB 2) of the AMP300 device. .apk ☛...
  • Page 33 Unplug the USB storage device. This message should be displayed for few seconds, the time for the to install the APK. ☛ In case several APK are available on the USB storage device, the installing message appears for each new APK to install. When the APK installation is completed, this message should be displayed for 10 seconds.
  • Page 34 Prerequisite: a WebDAV client (CarotDAV or BitKinex for example) is installed on your computer or the AMP300 is mounted as a disk on the MS-Windows explorer. For further information, refer to the chapter § Device network disk mounting in MS-Windows explorer.
  • Page 35 When the APK installation is completed, this message should be displayed for 10 seconds. This message is then displayed until the device is rebooting automatically once. Each APK installed should be then visible on the desktop.
  • Page 36 This message is displayed for ten seconds when an error occured while copying the APK. The USB storage device is not properly supported. Restart again the operation with another USB storage device. If the problem persists, you can contact support@qeedji.tech.

  • Page 37: Device Configuration By Script

    The list of the functions supported in the script are shown in the release note Configuration script release note. The configuration script can be also downloaded at this location. Rename the configuration script according to the supported filename pattern: common for multiple AMP300 devices: configuration.js 000000000000.js for a specific AMP300 device: with the format <device_LAN1_MAC_address>.js...
  • Page 38 Device configuration by USB Copy the configuration script at the root directory of an USB storage device and insert it on the USB-C connector (USB 1 or USB 2) of the AMP300 device. This message is displayed for only few seconds.
  • Page 39 This message is then displayed until the device is rebooting automatically once.
  • Page 40 Prerequisite: a WebDAV client (CarotDAV or BitKinex for example) is installed on your computer or the AMP300 is mounted as a disk on the MS-Windows explorer. For further information, refer to the chapter § Device network disk mounting in MS-Windows explorer.
  • Page 41 This message is then displayed until the device is rebooting automatically once. ☛ Once the configuration script is installed, the file is removed.
  • Page 42 Device configuration by server TFTP and server DHCP with code 66 The AMP300 device can be configured thanks to a configuration script hosted on a TFTP server + DHCP server (code 66). Prerequisites: the LAN or the WLAN interface is configured in DHCP mode, a TFTP server and a DHCP server are properly configured, are working properly and are available on the network.
  • Page 43 This error message is displayed for ten seconds when the copy of the script from the USB storage device has failed. If the proble persists, try again with another USB storage device. This error message is displayed for ten seconds when the configuration script contains a Javascript syntax error. Double check that the configuration script content is consistent for the AMP300 device.

  • Page 44: Hardware Reset

    2.1.4    Hardware reset In case your APK or the would not respond anymore, you can proceed to a AMP300 hardware reset: insert for example a paper clip inside the hole until feeling the button, System button hold the pressed for more than 5 seconds,...

  • Page 45: Factory Recovery

    The factory recovery consists in recovering the OS and data like it was at the factory. Consequently, the different APK installed by the user and the AMP300 device configuration data will be lost. So, it is highly recommended to save all the required settings to be able to reconfigure your AMP300 device afterwards.

  • Page 46: Part Iii : Applicative User Interface

    Applicative user interface Part III...

  • Page 47: Applicative User Interface

    3.1    Applicative user interface The AMP300 device supports a Web user interface that can be accessed with a Web browser. The supported Web browsers are: Google Chrome Mozilla Firefox MS-Edge (Chromium) It is available from the URL: http://<device_IP_addr>/ The defaut credentials values put at factory for the connection profile are:...

  • Page 48: Part Iv : Administration Console User Interface

    Administration console user interface Part IV...

  • Page 49: Device Configuration Web User Interface

    4.1    device configuration Web user interface The AMP300 device supports a device configuration Web user interface that can be accessed with a Web browser. The supported Web browsers are: Google Chrome Mozilla Firefox MS-Edge (Chromium) It is available from the URL: http://<device_IP_addr>/...

  • Page 50: Configuration > Administrator

    ☛ It is recommended that you enter one unique value for each device. In case several AMP300 devices are located in different buildings Hostname or geographical locations, we recommend that you enter hostname values with information about the building and the location (e.g.
  • Page 51 This is an example with different credentials for the four connection profiles. ☛ The association of the credentials to the connection profiles are taken into account only after a device reboot. In case the user takes more than 5 minutes to create the credentials, associate them to the profile and reboot, the user may have to reauthenticate (with the credentials not modified).

  • Page 52: Configuration > Lan_1

    4.1.2    Configuration > LAN_1 tab, select the LAN_1 menu to set up the network configuration of the In the interface of your device. Configuration LAN_1 ☛ The device supports the UPnP and can be for example detected automatically in the local network environment of your computer. ☛...
  • Page 53 LAN_1 disconnect the RJ45 cable (cable1 for network1) from your computer, connect a RJ45 cable (cable2 for network2) between your computer and the AMP300 device, connect to the device configuration Web user interface with a Web browser with its IPV6 address (for example...
  • Page 54 To activate security on interface, set the field to 802.1X instead of None. 802.1X LAN_1 Security Choose one among PWD, MD5, GTC, PEAP, TLS, TTLS. The chosen must be supported by your RADIUS server. EAP method EAP method ☛ In the context of a secure network, your device must be first declared in your dedicated RADIUS server with a .
  • Page 55 802.1X CA certificate 802.1X CA certificate AMP300 device. For further information about certificates installation, refer to the chapter § Certificates. ☛ The is the certificate with the highest autority for your RADIUS server. For further information, please contact your IT 802.1X CA certificate...
  • Page 56 ¹ For further information, refer to the chapter § Appendix: File transfer from a computer. You can configure also the interface directly with the Android settings. That requires to have a touch screen device connected to the AMP300 WLAN_1 device.
  • Page 57 To detect the , click on the button. WIFI spots SSID Scan ☛ In case the of your WIFI router is not broadcasted (or hidden), click on the button to add manually a interface. Enter the SSID WLAN_1 wished value and check the option SSID The SSID is hidden Select one of the detected...

  • Page 58: Configuration > Wlan_1

    Choose whether the IP address is static or given by the server. If static, fill the suitable parameters like DHCP subnet mask gateway To use a specific interface, select the in the drop down list then enter your proxy Proxy server WLAN_1 Manual proxy configuration Proxy servers...
  • Page 59 To use an automatic configuration for interface, select the in the drop down list Proxy server WLAN_1 Automatic proxy configuration Proxy server then enter the PAC file URL allowing to get automatically the proxy server configuration. For example: https://domain.contoso.en/dir/my-proxy-auto-conf.pac The supported securities¹ are: None, WEP, WPA-Personal (PSK),...
  • Page 60 Fill the required crypto keys for these securities: WPA-Personal (PSK) WPA2-Personal (PSK) The allowed length for crypto key is: 5 or 13 digits when using ASCII-7bits characters, 10 or 16 digits when using hexadecimal characters.
  • Page 61 The allowed length for crypto key is 8 to 63 digits. Only ASCII-7bits characters are allowed for the crypto WPA-Personal (PSK) WPA2-Personal (PSK) key. If the WPA encryption of your router is unknown or if the WPA encryption of your router is , do rather use the default value corresponding to the Auto automatic mode:...
  • Page 62 802.1X CA certificate 802.1X CA certificate AMP300 device. For further information about certificates installation, refer to the chapter § Certificates. ☛ The is the certificate with the highest autority for your RADIUS server. For further information, please contact your IT 802.1X CA certificate...

  • Page 63: Configuration > Output

    USB-C connector or on the USB 1 USB-C connector. ☛ When supplied by USB-C by a display device, the AMP300 device may be not able to output the video signal on the USB-C connector USB 1 when an USB-C to Jack 3.5" audio adapter is plugged on the USB-C connector.

  • Page 64: Configuration > Apps

    4.1.5    Configuration > Apps tab, select the Apps menu to manage the In the installed in the operating system, whose launching at device start-up can Configuration Apps be activated or deactivated. column of the table allows to watch the installed in the operating system: Apps...
  • Page 65 Some Apps consist in a couple of APK (main part + UI part). This is an example when the App is Qeedji PowerPoint publisher for media player installed and properly activated: PowerPoint Publisher (for the main part): checkbox : checked,...
  • Page 66 App start. To work around, activate back the UI part APK of the App then reboot the device. This is an example with the not properly deactivated: Qeedji PowerPoint publisher for media player App PowerPoint Publisher (= the main part): checkbox : checked,...
  • Page 67 App form (optional) Some can support a configuration form. To watch the configuration form for an , select the appropriate . If a form is supported for this App, the form of the appears just below the table of installed Apps Apps This is an example with the...

  • Page 68: Configuration > Servers

    4.1.6    Configuration > Servers tab, select the Servers menu to define the configuration of the servers peripheral to your device. In the Configuration The NTP server input allows to either choose the default NTP server¹ or enter your favorite NTP server domain so that the device is always on time.

  • Page 69: Configuration > Certificates

    Click on the  button of the appropriate sections to add a certificate. This is an example with some certificates loaded in the AMP300 device. 802.1X ☛ In case the remote content (for example an .ics) must be read on a server available in https, but the server's certificate is not signed, it may be required to install the server certificate both in the...

  • Page 70: Configuration > Date And Time

    4.1.8    Configuration > Date and time tab, select the Date and Time menu to check the time configuration: In the Configuration timezone, system date of your device (day and time). To update the date and time of your device, click on the value and then click on the button.

  • Page 71: Configuration > Regionality

    4.1.9    Configuration > Regionality tab, select the Regionality menu to choose the language in which information messages or error messages related to the device In the Configuration need be displayed on the screen. The supported languages are: English, Spanish, German, French, Italian,...

  • Page 72: Configuration > Tasks

    4.1.10    Configuration > Tasks tab, select the Tasks menu to: In the Configuration program a task, reboot manager program a task for the appliance to reduce its energy consumption. power manager Device reboot manager task To create a task, click on the  button then click on the button.
  • Page 73 Device power manager tasks To create a task, click on the  button then click on the button. power manager The possible task profiles are: power manager Very highly optimized, Highly optimized. It is possible to create several tasks within the same day. The tasks are stored into an ICAL format in the power manager power manager...
  • Page 74 ☛ During the device standby, the configuration upgrade through TFTP (DHCP/code 66) is effective but the associated information message cannot be seen on the screen. ☛ During the device standby, the device configuration update by USB storage device injection, the APK installation by USB storage device injection and the operation system upgrade by USB storage device injection keep supported.

  • Page 75: Configuration > Variables

    4.1.11    Configuration > Variables tab, select the Variables menu to set variable (or TAG) values for this device. In the Configuration The variable names are: field1 field2 field3 field4 field5 These variable values can then be used in Apps to perform specific processing for devices having specific variables values.

  • Page 76: Maintenance > Test Card

    Test card ☛ The test pattern content is displayed by the AMP300 device at start-up when it is coming straight from factory. For further information about the test pattern content, refer to the chapter § Test card.

  • Page 77: Maintenance > Files

    Files menu to see the directories and files hosted at the root directory of the WebDAV server. In the Maintenance These are the available WebDAV directories: : directory allowing to upload APK and install it on the AMP300 device, .apps : directory allowing to upload a configuration script to auto-configure the device, .configuration : directory hosting the App content, .data...

  • Page 78: Maintenance > Firmware

    ☛ Corrective and evolutive maintenance software versions are regularly made available on the http://www.qeedji.tech/en/support/index.php? AMP300/AQS_firmware_and_documentations. It is therefore advised to regularly update the operating system of your device. From this website, download the latest version available for your device model.

  • Page 79: Maintenance > Preferences

    4.1.15    Maintenance > Preferences tab, select the Preferences menu to view all the preferences. In the Maintenance The filter allows to display only the preferences whose name contains the string entered in the filter. All the preferences have optimal default values. Double click on a preference to change its value.

  • Page 80: Information > Device

    : label and version of the embedded operating system, Operating system : model of the device, Model Qeedji : name of the device, Device name : name of the device on the network, Hostname : MAC address of the LAN interface, MAC Id : Universal Unique IDentifier,...

  • Page 81: Information > Usb Adapters

    USB adapters menu to see the product name and manufacturer name of the USB adapter devices connected to the In the Information AMP300 device. This is an example of pane with a USB-A to USB-C hub device connected to the AMP300 device.

  • Page 82: Information > Network

    In the Information This is an example when the AMP300 device is connected to a LAN network. This is an example when the AMP300 device is connected to a WIFI network. ☛ The displaying of the IP V6 address value starting with the prefix is not supported in this pane.

  • Page 83: Information > Screens

    4.1.19    Information > Screens tab, select the Screens menu to view information about the display device connected on the HDMI connector and the rotation In the Information angle.

  • Page 84: Part V : Technical Information

    Technical information Part V...

  • Page 85: Technical Specifications

    16 GB¹ Built-in micro SD card 15 x 11 x 1 mm (0.59 x 0.43 x 0.04") ¹ The device may support micro SD card whose memory size is upper than 16 GB. For further information, contact sales@qeedji.tech. Volatile memory...
  • Page 86 Fanless |Operating system | |:-- | | for AMP300 | (Android Open Source Project) AOSP Qeedji System Operating temperature Storage temperature 0 °C to +30 °C (32 °F to 86 °F) -20 °C to +60 °C (-4 °F to 140 °F)

  • Page 87: Antenna Return Loss

    5.2    Antenna return loss This is the return loss diagram for the WIFI/Bluetooth antenna:...

  • Page 88: Conformities

    5.3    Conformities In conformity with the following European directives: LVD 2014/35/EU EMC 2014/30/EU...

  • Page 89: Part Vi : Contacts

    Contacts Part VI...

  • Page 90: Contacts

    6.1    Contacts For further information, please contact us: Technical support: support@qeedji.tech, Sales department: sales@qeedji.tech. Refer to the Website for FAQ, application notes, and software downloads: https://www.qeedji.tech/ Qeedji Qeedji FRANCE INNES SA 5A rue Pierre Joseph Colin 35700 RENNES Tel: +33 (0)2 23 20 01 62...

  • Page 91: Part Vii : Appendix

    Appendix Part VII...

  • Page 92: Appendix: Qeedji Powerpoint Publisher For Media Players

    PowerPoint Add In can deal with several AMP300 devices with the same MS-PowerPoint Qeedji PowerPoint Publisher For Media Players presentation. ☛ In this version, only the AMP300 devices, whose WebDAV servers are available with the scheme (default value), are supported. http://...
  • Page 93 ☛ In some rare cases, the warning message PowerPoint has problems with the Qeedji complement. If the problem persists, disable this add-on could be prompted when opening a MS-Office PowerPoint. In this case, do and check for updates.
  • Page 94 Qeedji PowerPoint Publisher For Media Players: register one or several devices To register one or several AMP300 devices, open you MS-Office Powerpoint presentation then: click on the menu, Qeedji on the ribbon, click on the item then select the tab.
  • Page 95 ☛ The AMP300 devices sorting order in the list is decisive because it is taken into account during the publication. The slides of the first section, or the first ten slides, are always affected to the AMP300 device located at the top of the list. Then the publication is continuing with the next AMP300 device located immediately below, and so on.
  • Page 96 The Publishing status report is showing whether the publishing on each AMP300 devices has succeeded or not: : the publication has succeeded Publishing succeeded : the publishing has failed. In this case, check the network connection between your computer and the AMP300. Publishing failure (Error: 503) Publishing status report example: 1/5 - Publishing on device: AMP300 (192.168.1.84)
  • Page 97 Qeedji PowerPoint Publisher For Media Players: define a default duration per page To define a default duration per page to your MS-PowerPoint presentation, open you MS-Office Powerpoint presentation then: click on the menu, Qeedji on the ribbon, click on the item then select the tab.
  • Page 98 ☛ The banner height is 9.26% of the PowerPoint slide height. ☛ When the scrolling text overlay is supported by the AMP300 device, the max. number of character per line is depending on the display resolution of the AMP300 device and the chosen font. Outside this limit, the scrolling text cannot be displayed.
  • Page 99 (older OS, Smart monitor), the message below is displayed Qeedji PowerPoint Publisher for Media Player Information The App "Qeedji Powerpoint Publisher for Media player" is not supported on this device ☛ The may prevent to publish properly by returning this error:...

  • Page 100: Appendix: Iso Image Burning With Balenaetcher

    ☛ If required, use a SD card adapter. ☛ After inserting the SD card in the computer, if MS-Windows 10 is displaying 14 times a format popup inviting to format the 14 partitions of the AMP300 SD card, click on the button of the format popups.

  • Page 101: Appendix: Tftp And Dhcp Server Configuration

    TFTP DHCP ¹ Trivial File Transfer Protocol The network interfaces of the AMP300 devices must be configured to obtain their IP address with the server. DHCP downloading operation (specific or general) is done with the DHCP server (during the device booting). The Qeedji TFTP configuration by script device configures first its network parameters obtained by...

  • Page 102: Appendix: Timezone

    7.4    Appendix: Timezone Area Country/Town pair values supported for the function of the configuration script (1 of 2) setTimezone Pacific/Wallis, Pacific/Wake, Pacific/Tongatapu, Pacific/Tarawa, Pacific/Tahiti, Pacific/Saipan, Pacific/Rarotonga, Pacific/Port_Moresby, Pacific/Pohnpei, Pacific/Pitcairn, Pacific/Palau, Pacific/Pago_Pago, Pacific/Noumea, Pacific/Norfolk, Pacific/Niue, Pacific/Nauru, Pacific/Midway, Pacific/Marquesas, Pacific/Majuro, Pacific/Kwajalein, Pacific/Kosrae, Pacific Pacific/Kiritimati, Pacific/Honolulu, Pacific/Guam, Pacific/Guadalcanal, Pacific/Gambier, Pacific/Galapagos, Pacific/Funafuti, Pacific/Fiji, Pacific/Fakaofo, Pacific/Enderbury, Pacific/Efate, Pacific/Easter, Pacific/Chuuk, Pacific/Chatham, Pacific/Bougainville,...
  • Page 103 Area Country/Town pair values supported for the function of the configuration script (2 of 2) setTimezone Africa/Windhoek, Africa/Tunis, Africa/Tripoli, Africa/Sao_Tome, Africa/Porto-Novo, Africa/Ouagadougou, Africa/Nouakchott, Africa/Niamey, Africa/Ndjamena, Africa/Nairobi, Africa/Monrovia, Africa/Mogadishu, Africa/Mbabane, Africa/Maseru, Africa/Maputo, Africa/Malabo, Africa/Lusaka, Africa/Lubumbashi, Africa/Luanda, Africa/Lome, Africa/Libreville, Africa/Lagos, Africa/Kinshasa, Africa Africa/Kigali, Africa/Khartoum, Africa/Kampala, Africa/Juba, Africa/Johannesburg, Africa/Harare, Africa/Gaborone, Africa/Freetown, Africa/El_Aaiun, Africa/Douala, Africa/Djibouti, Africa/Dar_es_Salaam, Africa/Dakar, Africa/Conakry, Africa/Ceuta, Africa/Casablanca, Africa/Cairo, Africa/Bujumbura, Africa/Brazzaville, Africa/Blantyre, Africa/Bissau, Africa/Banjul, Africa/Bangui, Africa/Bamako,...

  • Page 104: Appendix: Device Network Disk Mounting In Ms-Windows Explorer

    7.5    Appendix: Device network disk mounting in MS-Windows explorer Do follow carefully the procedure below to mount properly the AMP300 device as network disk in MS-Windows explorer. Indeed, after a first ◬ mounting failure with wrong login credentials, it could be difficult to mount the device afterwards because MS-Windows keeps the wrong login credentials in cache memory for few tenths of minutes preventing to mount the device for a while.

  • Page 105: Appendix: Usb Mass Storage

    7.6    Appendix: USB mass storage Some rare USB sticks could be not detected by the device because the USB partitionning is not supported by . In this case, a Unsupported General USB drive notification is raised. ☛ The notifications can be watched in mode, but not in mode.

  • Page 106: Appendix: File Transfer From A Computer

    7.7    Appendix: File transfer from a computer Like any Android device, it is possible to access to the file system of the AMP300 device from a computer. That procedure can be used for example to push a configuration script or a firmware from a computer when no network is available on the AMP300 device.

  • Page 107: Appendix: Remove An App With Android Settings

    7.8    Appendix: Remove an App with Android settings In case you have published on the device, several Apps programmed in autostart mode, they are all starting after the device boot-up has ended. ☛ This operation requires to connect a touch screen device on the connector or on the USB-C connector.

  • Page 108: Appendix: 802.1X Security Configuration With Android Settings

    AMP300 device generated with the CA certificate of your RADIUS server. When using a RADIUS certificate, it is recommended that the system date of the AMP300 device is properly set, else you may not be able to ◬...

  • Page 109: Appendix: Certificates Installation With Android Settings

    Install from SD card To install a certificate from your USB mass storage: copy the certificate file on your USB mass storage, insert the USB mass storage in the USB hub connected to the AMP300 device, select the item, Install from SD card press on the bars ...

  • Page 110: Appendix: Power Manager And Screen Saver Modes

    7.11    Appendix: Power manager and Screen Saver modes For the AMP300 device, the mode is supported. By default, the mode is not activated. Screen Saver Screen Saver Default Possible User preference name Description value access values system.screen_off_timeout 60000 Duration in ms before going to mode.

  • Page 111: Appendix: Factory Reset

    7.12    Appendix: Factory reset The factory reset consists in recovering the data like it was at the factory. This procedure requires that the AMP300 device is connected to a touch screen. From the desktop¹, swipe your finger to make appear the...

Table of Contents