Introduction - Qeedji DMB 400 User Manual

1.1 Introduction
This manual explains how to install and configure your DMB 400 device.
Recommendations and warnings
This device is designed to be used indoor.
This device is intended to work with the power supply unit. This power supply unit must be connected to a mains socket conforming to standard NF C
15-100. If the AC power cable is damaged, it must be replaced. It is possible to order a power supply unit replacement by sending a request to the
email address sales@ qeedji.tech.
This device is a Class A device. In a residential environment, this device may cause radio interference. In this case, the user is asked to take
appropriate measures.
Content of the package
Items
Device
Power supply unit
Labels
WLAN antennas
Description
DMB 400 device with Gekkota embedded.
12 V power supply unit with cable of 1.2 m.
One on the cardboard packaging and another one at the back of the product.
Additional label can be present in case build-in options.
To be screwed on the dedicated WLAN locations.
Provided with the device when it is supporting the option.
W L AN
5
Q uantity
1
1
2
2