Table of Contents
Advertisement
Available languages
Available languages
AWARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to wall behind range.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death or serious burns to children and adults.
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
m
Tape measure
6"
carbide tip masonry bit
mg
#2 Phillips screwdriver
m=
Marker or pencil
mw
'%" x 4%" flat-blade
gm = Pipe-joint compound
screwdriver
resistant to LP gas
m
Level
m
Noncorrosive leak-detection
=
Drill
solution
m
Wrench or pliers
m
Tubing cutter
m
Pipe wrench
For LP/Natural Gas
m
Adjustable wrench or
Conversions
.
54" wrench
T15 Torx™
screwdriver
m
%" drive ratchet
%" socket
a
1%" orill bit
m
Adjustable wrench
m
'%e" combination wrench
™
2" deep-well socket
mw
4%", %", %e" nut drivers
=
7 mmnut driver
mg
Masking tape
Parts supplied
Check that all parts are included.
a
Anti-tip bracket kit
A. Anti-tip bracket
B. #8-18 x 1" Phillips head screws (4)
NOTE: Anti-tip bracket must be securely mounted to
subfloor. Thickness of flooring may require longer screws to
anchor bracket to subfloor. Longer screws are available from
your local hardware store. See "Install Anti-Tip Bracket"
section.
m
Gas pressure regulator
m
Burner grates
T®TORX
is a registered trademark of Acument Intellectual Properties, LLC.
18 OC
PONS
Burner heads and caps
Griddle drip tray (on griddle models)
LP orifice package (W10323791)
Conversion label (8114P522-60)
NOTE: The cooktop is manufactured for use with Natural gas.
To convert to LP gas, see the "Gas Conversions" section.
Parts needed
All models must be installed with a backguard if installing at zero
clearance to a combustible backwall. See "Cabinet Dimensions"
in the "Location Requirements" section for installation
requirements.
mw
30" (76.2 cm) Adjustable Backguard
Order Part Number 8285148
gm
36" (91.4 cm) Adjustable Backguard
Order Part Number 8284756
m
48" (121.9 cm) Adjustable Backguard
Order Part Number 8284755
m
22" (65.9 cm) Backguard with Shelf for 30" (76.2 cm)
Ranges
Order Part Number W10225950
m
22" (65.9 cm) Backguard with Shelf for 36" (91.4 cm)
Ranges
Order Part Number W10225949
m
22" (65.9 cm) Backguard with Shelf for 48" (121.9 cm)
Ranges
Order Part Number W10225948
To order, see the "Assistance or Service" section of the Use
and Care Guide.
Check local codes and consult gas supplier. Check existing gas
supply and electrical supply. See "Electrical Requirements" and
"Gas Supply Requirements" sections.
It is recommended that all electrical connections be made by a
licensed, qualified electrical installer.
High Altitude Conversion
To convert the range for elevations above 6,560 ft (1999.5 m),
order a High Altitude Conversion Kit.
m
Part Number W10324363 - LP high altitude
m=
Part Number W10324365 - Natural gas high altitude
To order, see the "Assistance or Service" section of the Use and
Care Guide.
Advertisement
Table of Contents
