Installation Requirements; Toois An Parts - Jenn-Air JDRP548WP02 Installation Instructions Manual

AWARNING
Tip Over Hazard
A child or adult can tip the range and be killed.
Connect anti-tip bracket to wall behind range.
Reconnect the anti-tip bracket, if the range is moved.
Failure to follow these instructions can result in death or serious burns to children and adults.
INSTALLATION REQUIREMENTS
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools needed
m Tape measure 6" carbide tip masonry bit
mg #2 Phillips screwdriver m= Marker or pencil
mw '%" x 4%" flat-blade gm = Pipe-joint compound
screwdriver resistant to LP gas
m Level m Noncorrosive leak-detection
. solution
a Drill
m Wrench or pliers m Tubing cutter
m Pipe wrench For LP/Natural Gas
m Adjustable wrench or Conversions
34" drive ratchet Ya" deep-well socket
Ye" drill bit
1%6" combination wrench &@
7 mm nut driver
Masking tape
V4", %", 4s" nut drivers
Parts supplied
Check that all parts are included.
a Anti-tip bracket kit
A. Anti-tip bracket
B. #8-18 x 1" Phillips head screws (4)
NOTE: Anti-tip bracket must be securely mounted to
subfloor. Thickness of flooring may require longer screws to
anchor bracket to subfloor. Longer screws are available from
your local hardware store. See "Install Anti-Tip Bracket"
section.
m Gas pressure regulator
m Burner grates
Burner bases and burner caps
Griddle drip tray (on griddle models)
LP orifice package (W10393255)
Conversion label (W10393342)
NOTE: The cooktop is manufactured for use with Natural gas.
To convert to LP gas, see the "Gas Conversions" section.
Parts needed
m Power supply cord kit:
m= 30" (76.2 cm) and 36" (91.4 cm) models - A UL listed
40 amp power supply cord kit
m 48" (121.9 cm) models - A UL listed 50 amp power supply
cord kit marked for use with nominal 1%" (84.93 mm)
diameter connection openings
mg AUL listed strain relief
m UL listed wire connectors
All models must be installed with a backguard if installing at zero
clearance to a combustible backwall. See "Cabinet Dimensions"
in the "Location Requirements" section for installation
requirements.
mw 30" (76.2 cm) Adjustable Backguard
Order Part Number 8285148
gm 36" (91.4 cm) Adjustable Backguard
Order Part Number 8284756
m 48" (121.9 cm) Adjustable Backguard
Order Part Number 8284755
mg 9" (22.9 cm) Backguard for 30" (76.2 cm) Ranges
Order Part Number W10115773
gm 9" (22.9 cm) Backguard for 36" (91.4 cm) Ranges
Order Part Number W10115776
gm 9" (22.9 cm) Backguard for 48" (121.9 cm) Ranges
Order Part Number W10115777
m 22" (65.9 cm) Backsplash with Dual-Position Shelf for
30" (76.2 cm) Ranges
Order Part Number W10285447
m 22" (65.9 cm) Backsplash with Dual-Position Shelf for
36" (91.4 cm) Ranges
Order Part Number W10285448
m= 22" (65.9 cm) Backsplash with Dual-Position Shelf for
48" (121.9 cm) Ranges
Order Part Number W10285449
To order, see the "Assistance or Service" section of the Use
and Care Guide.