Child Lock - Linak HC40 Advanced User Manual

CHILD LOCK

It is possible to set a child lock on the HC40, meaning a specific button combination must be pressed to
unlock the hand control before it is possible to run the bed�
Enabling the child lock
1� Highlight the "CHILD LOCK" bar in the "MY BED" menu
2� Press the 'select' button and a notification shows�
3� Press the 'select' button or button 3 "OK" to activate child lock�
4� The icon changes to green to indicate that child lock is enabled�
Unlocking the hand control
Child lock enabled is illustrated by a 'lock' icon at the top of the screen saver�
1� To unlock, press and hold at the same time the 'left' and 'right' buttons for 3 seconds until the main
screen shows�
A guide explaining this procedure pops up at any press on a button from the locked screen saver�
HC40 Advanced | 38