Child Lock - Linak Homeline HC40BL User Manual

Child lock

It is possible to set a child lock on the HC40, meaning a specific button combination must be pressed to unlock the hand
control before it is possible to run the bed.
Enabling the child lock
1. Highlight the "CHILD LOCK" bar in the "MY BED" menu
2. Press the 'select' button and a notification shows.
3. Press the 'select' button or button 3 "OK" to activate child lock.
4. The icon changes to green to indicate that child lock is enabled.
Unlocking the hand control
Child lock enabled is illustrated by a 'lock' icon at the top of the screen saver.
1. To unlock, press and hold at the same time the 'left' and 'right' buttons for 3 seconds until the main screen shows.
A guide explaining this procedure pops up at any press on a button from the locked screen saver.
Page 33 of 40