Sleep Timer - Linak HC40 Advanced User Manual

SLEEP TIMER

The sleep timer functionality is a timer for the bed to return to flat position or a predefined favourite
position, e�g� a sleeping position with the head a little raised� A typical use scenario could be a user wanting
to fall asleep watching TV� He has the back of the bed raised and he sets the timer to 30 minutes on the
HC40� When the timer elapses, the bed drives to flat position and he can sleep in a comfortable position�
The sleep timer functionality requires impulse drive enabled� The LINAK subsidiary and customer must
have a written agreement that the customer takes full responsibility for this functionality�
1� Highlight the "SLEEP TIMER" bar in the "MY BED" menu and press the 'select' button to access the
sleep timer�
2� Use the 'up' and 'down' buttons to adjust the time�
3� Press button 3 "START" to start the timer�
A 'moon' icon is now shown next to the time to indicate that the sleep timer is on�
Cancelling/stopping the sleep timer
1� Access the "SLEEP TIMER"�
2� Press button 3 "CANCEL" to stop the timer�
HC40 Advanced | 34