Advertisement
7. Tap a 1 1/2" x 3" Inner Cap (101) into each side
of the Butterfly Arm Frame (42).
Attach the Butterfly Arm Frame (42) to the Frame
(80) with a 3/8" x 3 1/4" Bolt (5) and a 3/8" Jam
Nut (2).
Do not fully tighten the Jam Nut yet.
8. Tap a 2" x 2" Inner Cap (78) into each end of the
Foot Rest (77).
Attach the Foot Rest (77) to the VKR Upright (70)
with two 3/8" x 2 3/4" Bolts (81), two 3/8" Flat
Washers (4), and two 3/8" Jam Nuts (2).
9. Insert the end of the Pivot Arm (91) with the
Pulley (12) up into the indicated opening in the
Frame (80).
Attach the Pivot Arm (91) and two 3/8" Spacers
(99) inside the Frame (80) with a 3/8" x 2 3/4"
Bolt (81), two 3/8" Flat Washers (4), and a 3/8"
Jam Nut (2).
7
Advertisement
