Advertisement
24. Route the Long Cable (45) under a 3 1/2" Pulley
(12). Attach the Pulley and two Pulley Covers (13)
to the "U" bracket on the Stabilizer (69) with the
3/8" x 2" Bolt (38) and a 3/8" Jam Nut (2). Make
sure that the Pulley Covers are turned so the
wide tabs are positioned as shown.
25.
Feed the
Long Cab'e (45)
under the
Weights (46).
Route the Long Cable (45) under a 3 1/2" Pulley
(12). Attach the Pulley and two Pulley Covers (13)
to the bracket on the Base (43) with a 3/8" x 1 3/4"
Bolt (14) and a 3/8" Jam Nut (2). Make sure that
the Pulley Covers are turned so the wide tabs
are positioned as shown.
Feed the Long Cable (45) over the lower 4 1/2"
Pulley (85).
26. Route the Long Cable (45) under a 3 1/2" Pulley
(12). Attach the Pulley and two Pulley Covers (13)
x_ xi
:
i:
x
i
_x XI
r~
_/rtn\ ...:xu xl
iu me iiiuieciLcu cjiuc ui me i lame (uoj vviiii me
3/8" x 4" Bolt (64) and a 3/8" Nylon Locknut (27).
Make sure that the Pulley Covers are turned
so the wide tabs are positioned as shown.
27. Route the Long Cable (45) up around a 3 1/2"
Pulley (12). Attach the Pulley and two Pulley
Covers (13) to the indicated side of the Press
Arm (28) with a 3/8" x 3 1/4" Bolt (5) and a 3/8"
Jam Nut (2). Make sure that the Pulley Covers
are turned so the wide tabs are positioned as
shown.
12
Advertisement
