Residual Risks; Preparation; Control Elements - Parkside Performance PSBSAP 20-Li C3 Translation Of The Original Instructions

GB
Safety instructions when using
long drill bits
• Never operate at higher speed
than the maximum speed rat-
ing of the drill bit. At higher
speeds, the bit is likely to bend if al-
lowed to rotate freely without contact-
ing the workpiece, resulting in personal
injury.
• Always start drilling at low
speed and with the bit tip in
contact with the workpiece. At
higher speeds, the bit is likely to bend if
allowed to rotate freely without contact-
ing the workpiece, resulting in personal
injury.
• Apply pressure only in direct
line with the bit and do not ap-
ply excessive pressure. Bits can
bend causing breakage or loss of con-
trol, resulting in personal injury.
Additional safety instructions
• Secure the workpiece. A work-
piece clamped with clamping devices
or in a vice is held more secure than by
hand.
• Switch the power tool off imme-
diately if the application tool
becomes blocked. Be prepared
for high torque reactions which
cause kickback. The application
tool becomes blocked when it becomes
jammed in the workpiece or when the
power tool becomes overloaded.
• Always wait until the power
tool has come to a complete
stop before placing it down. The
application tool can jam and cause
you to lose control of the power tool.
• Use suitable detectors to de-
termine if there are hidden sup-
ply lines or contact the local util-
ity company for assistance. Con-
tact with electric cables can cause fire
32
and electric shock. Damaging gas lines
can lead to explosion. Breaking water
pipes causes property damage.
• Only use accessories recom-
mended by PARKSIDE. Unsuitable
accessories may cause electric shock
or fire.

Residual risks

There will always be residual risks even
if you operate this power tool according
to the instructions. The following hazards
may occur in connection with the type and
design of this power tool:
• Hearing damage if suitable ear protec-
tion is not worn.
• Health injuries resulting from the effect
of hand/arm vibration in the event that
the tool is used over a longer period
of time or is not used and maintained
properly.
• Cutting injuries
WARNING! Danger due to electro-
magnetic field generated while the tool is
in operation. Under certain circumstances,
this field may negatively affect active or
passive medical implants. In order to re-
duce the danger of serious or fatal injur-
ies, we recommend that individuals who
wear medical implants should consult their
doctor and the manufacturer of the im-
plant before operating the machine.

Preparation

WARNING! Risk of injury due to
unintentional start-up. Only insert the re-
chargeable battery into the device once
the device is fully prepared for use.

Control elements

Familiarise yourself with the operating ele-
ments before using the device for the first
time.