Jet Eternity Delay Manual page 6

Dual Delay
This delay runs two different delay's with different subdivisions in full stereo and in ping pong (L &
R). Delay 1 is an analog delay which is set by the Subdivision switch and Delay 2 is a fixed dotted
eight digital delay. The Mix knob controls the level of delay 1 and the Cntrl 1 knob controls the
level of delay 2. The subdivision switch affects Delay 1 and is as follows:
1/4 Note Setting
Delay 1 will be set to a 1/4 note with Delay 2 set to a dotted 1/8 note
Dotted 1/8 Note Setting
Delay 1 will be set to the Golden Ratio with Delay 2 set to a dotted 1/8 note
1/8 Note Setting
Delay 1 will be set to an 1/8 note with Delay 2 set to a dotted 1/8 note
Echo | Slap | Doubler (ESD) Delay
This delay is actually three delay's in one and the subdivision switch selects between the three
different delay's. The Echo delay is called up when the Subdivision switch is set to the 1/4 note
position. Based on the tap tempo range (approx. 60 - 160 BPM) the Echo delay will range from 333
milliseconds to 125 milliseconds. When the subdivision switch is set to dotted 1/8, this calls call up
the Slap delay. The tap tempo range will go from 125 milliseconds to 47 milliseconds. When the
subdivision switch is set to the 1/8 note position, this calls call up the Doubler delay. The tap
tempo range will go from 63 milliseconds to 23 milliseconds. The Cntrl 1 knob widens the stereo
spread of the ESD delay, at fully counter-clockwise the stereo spread will be off and gets wider as
its rotated clockwise.
JET Signature Rhythm (JRD) Delay