Jet Eternity Delay Manual page 4

Rotate the knobs in Preset Mode to see the saved position of each knob
Quickly edit and save any preset by adjusting the knobs then holding the Bypass
switch for 3 seconds
Full MIDI control over every knob, switch, algorithm, preset, bpm (via midi clock), etc.
Stereo Analog Dry Thru
Live Mode, Preset Mode and Kill Dry Mode
Quickly jump between two different delays
Any preset can be queued up while in Live Mode without affecting your sound
The world's most advanced dedicated tap tempo switch:
Tap tempo range is from approx. 60 to 160 BPM
Tap tempo will average the BPM's based on the number of taps received, resulting in
extreme accuracy when MIDI clock isn't available
Tap tempo rate LED will automatically sync itself to BPM and flashes on the down beat
of each ¼ note. No more annoying flashing LED's that appear to be out of tempo with
the song.
Selectable subdivision rate switch, select between quarter, dotted eight, and eight note
subdivisions.
Use the Eternity in any rig
Mono in / Mono out
Mono in / Stereo out
Stereo in / Stereo out
Stereo in / Mono out (sums to Mono)
Kill Dry Mode
User adjustable Global Settings
Don't want to cycle through all 6 preset locations? Easy, define the number of onboard
presets available within the Global Settings.
Define which preset and algorithm loads at startup
Assign the Eternity to any MIDI channel 1 thru 16
Enable/Disable Kill Dry Mode
Power via 9v (Negative Tip) power supply (pwr supply not included)
Current Draw: 250mA
Enclosure Dimensions: 4.82" x 2.62" x 1.425"