Control Knobs - Jet Eternity Delay Manual

preset. When each knob is rotated, its corresponding LED will flash, and will return back to a solid
color once the knob is rotated over the stored location.

Control Knobs

Mix Knob
The Mix knob controls the overall loudness of the repeats. Rotating fully counter-clockwise will set
the repeats volume to minimum and fully clockwise to maximum. The Mix knob does not
affect/remove any of your dry signal. In order to get 100% wet delay, you need to engage Kill Dry
Mode.
Repeats Knob
The Repeats knob controls the number of repeats that will be regenerated from the Eternity.
Rotating fully counter-clockwise sets the repeats to minimum (one repeat) and fully clockwise sets
the repeats to maximum. At maximum settings, the repeats will not self-oscillate.
Filter Knob
The Filter knob controls the overall brightness of the repeats. Rotating fully counter-clockwise
allows all frequencies to pass, when rotating clockwise the upper frequencies will be removed.
Rotating clockwise sets the cutoff frequency lower and lower for darker repeats. The Filter knob
does not affect/remove any frequencies from your dry signal.
Cntrl1 Knob
The Cntrl1 knob varies per algorithm, please reference the Algorithm section for details pertaining
to the Cntrl1 knob for each Algorithm.
Soft Click Switches