Saving Presets - Jet Eternity Delay Manual

Operating your Eternity Delay

Saving Presets

Saving a preset is simple and quick. Cue up the current preset location you'd like to save a preset
to (identified by the color of the Mix LED). Change the active algorithm (if desired) and dial in the
settings on the toggle switch and knobs. Once you have a sound that you like, simply hold down
the Bypass Switch for 3 seconds. The Bypass LED will flash rapidly indicating the preset has been
saved.
***To save a preset the pedal must not be bypassed, you can save a preset in either Live Mode or
Preset Mode.