Table of Contents
Advertisement
MIDI Features and Controls
Saving Presets via MIDI
You have two options for creating presets. The first option is to use a "smart" midi controller (like
the JET MCX) that can send multiple simultaneous midi messages. Just send individual CC
messages to turn the Bypass switch on, select the algorithm, and set the values for each
knob/toggle switch.
The second option is to use our revolutionary CC Snapshot feature. While in Live Mode, select your
desired algorithm and then set all of the knobs & switches to their desired positions. From there
just send midi CC #28 with any Value from 7 thru 127. The pedal will then take a snapshot of its
algorithm and knob/switch positions, after that the knobs will flash green letting you know the
preset has been saved into permanent memory. To recall this preset, just send a PC message with
the same number used for the Value when sending CC #28.
Example: send CC #28 Value 10 to save a preset in the 10th slot. Send PC #10 to recall the new
preset.
The Eternity can save 127 onboard presets (the first 6 are saved using the pedal and 7 - 127 are
saved with CC Snapshot).
Advertisement
Table of Contents
