Control Change Messages - Jet Eternity Delay Manual

MIDI Features and Controls

Control Change Messages

Receiving CC messages will control the individual controls, knobs, and switches of the Eternity.
CC #18 Any value between 0 & 42 sets the subdivision toggle switch to ¼ notes
Any value between 43 & 85 sets the subdivision toggle switch to dotted ⅛ notes
Any value between 86 & 127 sets the subdivision toggle switch to ⅛ notes
CC #19 with any value of 0 thru 127 controls the Mix knob. 0 is the equivalent of having the
knob turned completely counter-clockwise (mix turned off) and 127 is like having the knob
turned completely clockwise (mix at full volume). Sending a value of 64 is the equivalent of
having the knob straight up at noon.
CC #20 with any value of 0 thru 127 controls the Repeats knob
CC #21 with any value of 0 thru 127 controls the Filter knob
CC #22 with any value of 0 thru 127 controls the Cntrl1 knob
CC #23
Any value between 0 & 63 turns the Bypass switch off
Any value between 64 & 127 turns the Bypass switch on
CC #24
Any value between 0 & 63 turns the Preset switch off
Any value between 64 & 127 turns the Preset switch on
CC #25 any value between 0 & 127 increments the Preset number
CC #26 any value between 0 & 127 decrements the Preset number
CC #27
Any value between 0 & 21 activates the Tape delay algorithm
Any value between 22 & 44 activates the Digital delay algorithm
Any value between 45 & 66 activates the Analog delay algorithm
Any value between 67 & 88 activates the Dual delay algorithm
Any value between 89 & 110 activates the ESD delay algorithm
Any value between 111 & 127 activates the JET Signature delay algorithm
CC #28 any value between 7 & 127 activates CC Snapshot mode
This takes a snapshot of your current settings and stores it in permanent memory at