Specification - Airlink101 SkyIPCam 650 AICAP650 User Manual

Airlink101 network camera user's manual
Table of Contents

Advertisement

A2: The configuration for the camera image display is incorrect. Through the Web
Configuration Utility, you can adjust the display parameters such as brightness, contrast,
hue, and light frequency.
Q: There are no images available through the web browser?
A: The ActiveX might be disabled. If you are viewing the images through Internet
Explorer, make sure ActiveX has been enabled in the Internet Options menu. See
Section 6 Enabling and Installing ActiveX for details. If your web browser does not
support ActiveX, you can use the bundled IPView Pro software instead.

Specification

Image Sensor
Sensor Type: Color CMOS sensor
Sensor Resolution: 640 x 480 pixels
Lens: f: 6.0 mm, F: 1.8
Video
Image Compression : MJPEG
Image Frame Rate: 30fps @ QCIF, 30fps @ CIF, 20fps @ VGA,
Quality Level: Low/Middle/High
Video Resolution: 176x144, 320x240, 640x480
Auto White Balance: Yes
Auto Exposure Control: Yes
Auto Gain Control: Yes
Digital Zoom: Yes
Vertical/Horizontal Reversal: Yes
Audio
Input: Built-in Omni-directional MIC; frequency @ 50~ 16000Hz;
Sensitivity @ -42dB +/- 3dB
Compression : PCM
Hardware
CPU: ADMtek 5120
RAM: 32MB
Flash ROM: 4MB
OS: Linux
PIR Sensor: Sensor distance @ 5 m (max.); Area @ X: +/- 15°, Y: +/- 15 °
Buzzer: Internal alarm buzzer
USB Port: Standard USB TypeA connector, USB 2.0/1.1 support
Pan/Tilt Function: Pan @ +120° ~ -180° (-120° ~ -180° area is for Privacy mode);
Tilt @ +45° ~ -5°
LED: One bi-color Access LED (green/orange); One bi-color Status LED (green/red)
79

Advertisement

Table of Contents
loading

This manual is also suitable for:

Aicap650Skyipcam 650

Table of Contents