Airlink101 SkyIPCam 650 AICAP650 User Manual page 12

Airlink101 network camera user's manual

Table of Contents

Step 3

If the Camera's default IP address is on a different subnet, the following

message will appear. Click Yes to continue. If you do not receive this message, skip to

Step

Step 4

Enter admin for both the Admin ID and Password and click OK.

Step 5

The Wizard will automatically generate an IP address for the camera, if this

address is not in use by any other device in your local network, click OK. Otherwise,

enter an available IP address (ex. 192.168.x.240) and click OK.

Table of Contents

Aicap650 Skyipcam 650