Web Configuration Utility - Airlink101 SkyIPCam 650 AICAP650 User Manual

Airlink101 network camera user's manual

Table of Contents

7. Web Configuration Utility

The built-in Web Configuration Utility allows you to remotely manage the IP Camera

with the ease and convenience of your Web Browser (Internet Explorer). If you are not

using Internet Explorer, you can use the bundled IPView Pro software to manage the

camera. See Section 8 for detail.

Step 1

Open your Web Browser (Internet Explorer), enter the default IP Address of the

Camera 192.168.1.240 in the Address Bar and press Enter.

Note: If you have changed the IP Address of the Camera as described in Section 5,

enter the Camera's new IP Address instead of the default.

Step 2

Enter the password for the camera (Default is admin) and click OK.

Table of Contents

Aicap650 Skyipcam 650