Write; Memory Write Switch - Roland GR-700 Owner's Manual

(6) Write
Writing Patch
Edit Mode
The GR-700 allows you to write the
sound you have synthesized into me-
mory.
(WA
a, Memory Write Switch @) |
[ Writing Procedure
1. Turn the GR-700 into Edit mode, then
edit any existing patch to your taste.
2. Set the Memory Protect Switch
to OFF.
3. Press the Memory Write Switch @),
* Here, the indicator lights up and the
Display shows Memory Number.
( = will flash)
4, By using the Pedal Switch, assign the
Memory Number, (=Bank and Patch
Number}
PROTECT
ON OFF ON
Assigning
Bank Number
*You do not need to assign Bank
Number, if writing into the same
Bank (e. g. replacing a patch with the
edited one}
*You do not need to assign a wrong
Bank Number, depress the Bank "edal
once again, then press the correct
Number Pedal.
*The moment you have assigned the
Patch Number, writing is completed,
and the GR-700 is turned to Play mode.
*|lf the Protect Switch has been set to
ON, the Display will show Prot. In such
a case, set the Protect Switch to OFF,
then repeat writing procedure.
Assigning
Patch Number
PROTECT
Aisin ON OFF ON
> Weiioag s,s