Guitar Controller; Balance; Master Volume - Roland GR-700 Owner's Manual

(2) Hold
The Hold function will work on the
synthesizer sound.
Pressing the Hold Pedal @ will hold the
sound currently in use, That is, the sound
will be retained at its sustain level as long
as the Pedal is depressed.
On releasing the Pedal, the sound will
decay strictly in the set release time of
the Envelope curve without affected by
the string vibration.
Also, the Hold effect can be set for each
string independently, therefore it is
possible to play other string while listen-
ing to the Hold sound.
While the Pedal is being depressed, the
Display Window shows 1 - 1.
(3) Guitar Controller *Refer to the operation manual of the
respective Guitar Controller to see its
functions.
a. Balance
With this knob turned fully counterclock-
wise, only direct guitar sound is obtained.
Adjust its level by using the Master
Volume b and the volume knob on the
amplifier. {If it is necessary, tune the
strings)
Sones
As you rotate this Balance Knob clock-
wise, synthesizer sound will be increased
and at its fully clockwise position, only
synthesizer sound will be heard. (If you
use two different amplifier respectively
for the guitar and the amplifier, each
volume can be independently set.)
b. Master Volume
This is to set the overall volume,