Roland GR-700 Owner's Manual page 27

27
Parameter
This is the filter to change the tone color by cutting or emphasizing harmonics. This
filter, however, lets the low frequency harmonics pass and block the high frequency
harmonics, and this cutoff point is controlled by voltage.
Programmer
Parameter
Number
Movement
Cutoff Frequency
Cutoff Freq
5
Vl 7
€.
" N
TVX
° 10
This sets the Cutoff Point of the VCF.
00
CUTOFF FREQ
Just rotate the knob
to set the cutoff fre-
quency.
Resonance
Resonance
This is to emphasize the Cutoff Point set
by the Cutoff Frequency.
ENV Modulation
The ENV output signal controls the VCF
Cutoff Point, therefore, the Cutoff Point
of the VCF in each note will be changed
by the ADSR pattern previously set.
Pitch Follow
Pitch Follow
=~ ! <
ee C3 ae
a oe
/ \
ry
The VCF Cutoff Point alters depending
on which key is played on the keyboard.
This Pitch Follow can be used to prevent
any inconsistency in the harmonic con-
tent caused by pitch alteration.