Roland GR-700 Owner's Manual page 25

Cross Modulation = 4
Cross Mod
Sync
Off. ° » Metal
©
eSync: The frequency of the DCO-2
synchronizes with that of the DCO-1,
therefore, you can generate a unique
waveform that is impossible to obtain if
using only one DCO or two DCO's
idenpendently.
®Metal: By controlling the DCO-1 with
the output signal from the DCO-2, ring
modulation style sound can be obtain-
ed. [NOTE 4]
Fine Tune
Fine Tune
The frequenny (pitch) of the DCO-2 can
be adjusted with this knob.
e@ Variable range --- +50 cent
Depth (LEO Depth)
LFO
i
~S
-~\
-
0 10
This adjusts the frequency(pitch) of the
DCO-2.
e@Variable range --- Approx. £1200 cent
When the LFO output is modulating the
DCO, this knob is used to adjust the
depth of the modulation.
i
Depth (ENV Depth)
eS
4 N\
co) 10
When the ENV output is modulating the
DCO, this knob is used to adjust the
depth of the modulation,
Polarity switch
In
Ww
This selects the polarity of the Envelope
curve. Normally, /\ is used. In\-4 mode,
the ADSR patterns will be all inverted,
therefore, pitch alteration, too.