Thermador Masterpiece MEDS301BS Installation Manual page 19

Attaching the connector brackets for a microwave
or speed oven
Ensure that the two (2) screws closest to the front of the
1.
support are on the inner and outer positions. The
screws are in this position on delivery.
2 x
Install both universal connector brackets on the outer
2.
set of holes on top of the lower oven using six (6) of the
screws provided. Tighten screws securely, but do not
overtighten.
6 x
Installing the decorative trim
Position the decorative trim piece so that the flanges
1.
with the holes face to the rear of the oven.
Align the outer flanges with the outside of the universal
2.
brackets. Fasten with one (1) screw each into the end
hole of each universal bracket. Tighten the screws
securely, but do not overtighten.
Prior to installation en-us
19