Table of Contents
Advertisement
CPU
Before you start, ensure that you have read "Prerequisite for CRU replacement" on page 60.
Removal steps
1. Remove the following parts if any:
a. "Side cover" on page 64
b. "Optional internal storage drive cage" on page 67
c. "CPU heat sink" on page 96
2. Remove the CPU.
Notes:
• Your CPU and CPU socket might look slightly different from the illustrations in this topic.
• Touch only the edges of the CPU. Do not touch the gold contacts on the bottom.
• Do not drop anything onto the microprocessor socket while it is exposed. The socket pins must be
kept as clean as possible.
• Use T-20 screw bit with the torque to 12 lb/in.
98
ThinkStation P8 Hardware Maintenance Manual
Advertisement
Table of Contents
