Table of Contents
Advertisement
Notes:
• You need T-20 screw bit longer than 6 inches to remove or install the CPU heat sink.
• The screws cannot be removed from the CPU heat sink.
• Place the CPU heat sink on its side. Ensure that the thermal grease on the bottom of it does not get in
contact with anything.
Installation steps
1. Align the four screws of the heat sink with the four screw holes on the CPU socket.
2. Press the heat sink to prevent it from being unbalanced. Tighten the four screws with the torque to 12 ±
1 lb/in in diagonal sequence of
Note: You need T-20 screw bit longer than 6 inches to remove or install the CPU heat sink.
1
2
3
4
,
,
,
.
.
Chapter 7
Hardware removal and installation
97
Advertisement
Table of Contents
