Advertisement
Figure 129. Rewinding tape into cartridge
1
2
2. Begin spooling the tape back into the cartridge by turning the supply reel motor ( 4 ) clockwise.
3. Continue spooling into the cartridge until the tape is taut and remains within the flanges of the tape
guiding rollers. Ensure that you do not stretch the tape. Continue spooling until all tape is removed
from the takeup reel ( 3 ).
4. Locate the threader intermediate gear ( 1 ) near the rear of the drive. You can use your finger to rotate
the threader intermediate gear ( 1 ) and slowly rotate the threader mechanism gear ( 2 ) clockwise.
This action draws the tape leader block assembly (LBA) into the cartridge.
218 IBM TS4300 Tape Library 机器类型 3555： 用户指南
Loader motor worm gear
Outer guide rail (WARNING: Do
Not Touch)
3
Takeup reel motor
4
Supply reel motor
IBM Confidential
Advertisement
