Advertisement
Quick Links
Advertisement
Related Manuals for Kogan FSDB24STNDB
Summary of Contents for Kogan FSDB24STNDB
- Page 1 ADJUSTABLE SMARTBELL STAND FSDB24STNDB...
- Page 3 COMPONENTS Part Description Part Description Bottom cross brace Nut (x20) Rear left stabilizer Flat washer (x36) Rear right stabilizer Screw 16x3 (x8) Stand leg (x2) Screw 16x2.75 (x4) Left dumbbell platform Screw 16x2.5 (x4) Right dumbbell platform Screw 16x1.0 (x4) Towel bar Casters (x4) Foot pegs (x4)
- Page 4 Hardware Hardware Card A Hardware Card B Description Description 2.75” Screw, button head 3.0” Screw, button head 2.5” Screw, button head Lock nut 1.0” Screw, flat head Flat washer Lock nut Allen key Flat washer Tools Required Socket 9/16” Wrench 9/16” Utility Knife or Scissors...
- Page 5 ASSEMBLY Step 1 Attach the rear left stabilizer (2) to the stand leg (4) using x2 screws (12), x2 nuts (10) and x4 flat washers (11). Note: Do not fully tighten hardware.
- Page 6 Step 2 Attach the rear right stabilizer (3) to the stand leg (4) using x2 screws (12), x2 nuts (10) and x4 flat washers (11). Note: Do not fully tighten hardware.
- Page 7 Step 3 Attach the bottom cross brace (1) to the rear left stabilizer (2) and the rear right stabilizer (3) using x4 screws (12), x4 nuts (10) and x8 flat washers (11). Ensure the narrower edge of the cross brace (1) is closer to the stand leg (4) uprights. Note: Do not full tighten the hardware.
- Page 8 Step 4 Install the centre plate (17) to both stand legs (4) using x4 screws (14), x4 nuts (10) and x8 flat washers (11). Note: Ensure the centre plate edges are on the outer sides of the legs and that the logo is right side up.
- Page 9 Step 5 Secure the left dumbbell platform (5) to the assembly using x2 screws (13) using x2 nuts (10) and x4 flat washers (11). Note: Ensure the screw holes in the platform are facing toward the inside of the stand.
- Page 10 Step 6 Secure the right dumbbell platform (5) to the assembly using x2 screws (13) using x2 nuts (10) and x4 flat washers (11). Note: Ensure the screw holes in the platform are facing toward the inside of the stand.
- Page 11 Step 7 Secure the towel bar (7) to the assembly using x4 screws (15) using x4 nuts (10) and x4 flat washers (11). Hand tighten the screws in a cross pattern to ensure an even fit. Note: Tighten all fasteners securely.
- Page 12 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...