Advertisement
Quick Links
Advertisement
Related Manuals for Kogan KASTTVPB55A
Summary of Contents for Kogan KASTTVPB55A
- Page 1 PORTABLE TV MOUNT STAND CART (32" - 55") KASTTVPB55A...
-
Page 3: Safety And Warnings
SAFETY & WARNINGS CAUTION: Rated weight for the TV stand is 33kg (77 lbs). The rated weight for the storage shelf is 5kg (11 lbs). Use with products heavier than the rated weights indicated may result in instability causing possible injury. •... - Page 4 COMPONENTS Stand assembly: A (x1) B (x2) C (x1) D (x1) E (x1) F (x1) G (x1) H (x1) I (x1) J (x4) K (x1) L (x1) M (x2) N M6x50 (x4) O M6x35 (x4) P M6x16 (x11) Q (x8) R (x1) S (x1) T (x1)
- Page 5 ASSEMBLY Step 1: Assembling the base Attach the cross-beam (C) to the two base beams (B), using the Allen key (S) to tighten the M6x16mm (P) and M6x35mm (O) screws in place as shown below. After the cross-beam is secured, attach the locking caster wheels (J), using the spanner (T) to tighten.
- Page 6 Step 2: Attaching the stand Place the stand (A) and joint cover (I) into position on the cross-beam, securing it with x4 washers (Q) and M6x50mm screws (N). Use the Allen key (S) to tighten. Warning: To adjust the height, pull the safety spring lock outwards (1) while pulling the column upward (2) at the same time.
- Page 7 Step 3: Insert the supporting M6x16mm screw (P) into the extended stand, tightening it with the Allen key. Insert the hole covers (R, M) in place.
- Page 8 Step 4: Attach the mounting plate (D) to the front of the stand, securing it with x4 washers (Q) and M6x16mm screws (P), using the Allen key to tighten. Step 5: Attach the shelf (G) to the stand, securing it to the shelf mount (H) with M6x16mm screws (P).
- Page 9 Step 6: Attach the mounting brackets to your TV. Depending on your TV, a combination of spacers (M-G, M-H) may be required to help create the correct amount of space for the brackets. Ensure the screws are fitted correctly into your TV’s VESA mount holes, and are not too long or too short in the back of the TV.
- Page 10 Step 7: NOTE: Ensure the locking caster wheels (J) are locked before attempting to mount the TV. With two people, lift the TV up and above the mounting plate and gently lower down into place, ensuring the TV is evenly positioned in the middle of the stand. The brackets each feature a vertical screw to secure to the bottom of the mount.
-
Page 11: Operation
OPERATION Cable Management: The stand features built-in cable management functionality, as per the below image:... - Page 12 Tilting: CAUTION: Loosen the knobs as shown and adjust the display to the desired angle, then tighten the knobs.
- Page 13 NOTES...
- Page 16 Need more information? We hope that this user guide has given you the assistance needed for a simple set-up. For the most up-to-date guide for your product, as well as any additional assistance you may require, head online to help.kogan.com...