Table of Contents
Advertisement
Chapt÷l_
_: TIh÷ IM÷nu Sy_t÷_
Installation
Installation:
The submenus contained in the Installation menu pertain to the way you've connected
the DVD Recorder to other components such as your T_, s_tel_ite receiver, ;_ndOr cable
box. If you move, or changeany of the information you gavethe DVD Recorder when
you set it up initially, you need to change the information in these menus.
Interactive
Setup: The first time you turned on your DVD Recordel_ you
had to complete an interactive setup so your DVD Recorder
could have the
information
it needs to function properly. For details about the Interactive
Setup, go to page 12.To go through this procedure again to change settings,
highlight Interactive Setup and press the OK button.
Channel Search:
If you've changed program provide_ (cable and/or satel-
lite), the Channel Search will automatically
search the signal and put the Iatest
channels in the DVD Recorder's channel list. Use the arrow buttons to high-
light Channel Search, and press OK to begin (a progress indicator
appears to
let you know how quickly the search is being completed).
Clock Setup:
If the clock is incorrectly
set or you skipped this step during
the interactive
setup, you can set the DVD Recorder's clock using the num-
ber buttons on the remote and the arrow buttons to navigate. Follow the on-
screen
instructions.
Note: In order
for Timer Recordings
to work, you must set the clock to _e
correct
time and
da_e.
Channel List: Enables you to change what channels are accessed when you
press the DVD Recorder's channel up and down buttons (if you delete a
channel from the channel list, you can sti{I access it by using the number but-
tons on the remote). For more exp{anation, go to page 14.
GUIDE Plus+
Setup:The first time you turned on your DVD Recorder. you had to
complete an interactive
setup so your DVD Recorder
could have the
information
it needs to function properly -- part of this initial setup
included information
for the GUIDE Plus+ programming
guide. If any of
your information
has changed (you moved, or you've changed your cable
service), access this menu to complete the GUIDE Plus+ Setup again.
Label: If you choose
On, the station
name
appears
when
you change
channels,
If you set
Label to Off, the station
name
doesn't
appear
when
you change
channels.
Memory
Card Menu
This menu only appears when you've connected a Class Compatible USB Mass Storage
Device (commonly _eferred to as a USB Card Reader) to the USB Port on the front of
the DVD Recorder (it's underneath the door on the left side of the unit). Go to page 59
for card re_ders that are compatihle with this DVD Recorde_
Once you've connected a the card reader and inserted the memory card, you can play
the music and/or imagessto_ed on the c_rthYou can also copy them onto a DVD+RW
disc.
Note: If there Jsa power failure or you unplug the DVD Recorderwhdecontent _s being copied, t he
DVD+RW discwdl becomepermanen_ inoperable.
I HPORTANT:
You can only copy contents of a memory
card to a DVD+RW
disc,_t
a DVD ÷R di_c.
50
Graphics contained within this publication
are for representation
only.
Advertisement
Table of Contents
