Explanation
of Buttons
_0L
;"
ic_
The Universal Remote Control that came with
your DVD Recorder operates most RCA, GE,
and Proscan branded components.
Additionally, the remote
is capable of being
programmed
to operate
many other brands
and models of TVs, satellite receivers,
or
cable boxes.
You can use this remote to operate the DVD Recorder, and to access the features
available.The remote is also designed to operate most RCA, GE. and Proscan
components
(TVs and satellite receivers).
If you have another brand, you can program
the remote control to operate those components
(go to page 21 for instructions).
The descriptions that follow describe how each button works when operating the DVD
Recorder. Many buttons will perform different function depending upon the type of disc
and menu functions of the disc.
Indicator
light
Used to indicate status of remote control when programming
it to
operate other components.Also,
indicates when batteries are low by Nickering when you
press a button on the remote.
0-9 (Number
buttons)
Use the number buttons to input information
such as chapter
numbers, track numbers, to make selections on some menu screens, and/or to change
channels.
Arrow
buttons
(up. down_ left. right) Use the arrow buttons to highlight opdons that
appear on the screen (the arrow buttons move the highlight in the corresponding
directions
-- up arrow moves the highlight up; left arrow moves the highlight left. etc.).
ADVANCE
When playing a disc. moves forward approximately
30 seconds. Not
applicable forVCDs
or rap3 files.
AGAIN
Accesses the SceneAgain
TM
feature --- replays the last several seconds
(approximately
I0) of the DVD disc you're playing. Not applicable forVCDs
or rap3 files.
ANGLE
Accesses various camera angles that might have been added to a pre-recorded
disc when it was created. Not available on all discs.
ANTENNA
In SAT.CABLE mode. functions as a Satellite/Receiver
button for RCA
satellite receivers.
CH
+ Advances to the next chapter or track when you're playing discs. Goes to the
next channel in the channel list when watchingT_L
CH - Goes back to the preceding chapter or track when you're playing a disc. Goes to
the previous channel in tbe channel list when watchingTV.
CLEAR
Removes on-screen menus and displays.
OVD
Puts the remote in DVD mode so it operates the DVD Recorder.
POFI_/ABD
Searches forward through the disc.
GO BACK
Returns you to the previous menu.When watchingTV, goes back to the
previous channel.
GUIDE
Accesses the GUIDE t_us+ system when watchingTV
or using the DVD
Recorder's menu system.
INEO
Displays the on-screen Info Display (for details about tbe IiT_o Displa_go to page 36.)
INPUT
Accesses the Input Jacks on the Recorder
(RF ANTENNA/CABLE
INPUT.
INPUT I, and INPUT 2 on the front of the DVD Recorder).
LIVE
When main menu is on the screen, provides quick access to watch T_L
MENU
When you're not playing a disc. accesses the DVD Recorder's menu.When
you're playing a disc. accesses the disc's menu. if one is available.
MUTE
Lowers the volume to its minimum level. Press again to restore volume.
OPEN.CLOSE
Opens and closes the disc tra_
OK
When a menu is on the screen, selects the highlighted item.
ON.OFF
Turns the DVD Recorder on and off.
PAUSE
Pauses disc play or recording.
pLAY
Begins disc play.
RECORD
Records programming.
REVERSE
Searches backward through the disc.
SAT.CABLE
Puts the remote
in Satellite
or
Cable
mode
in order
for the remote
to operate
a satellite
receiver
or
cable box.This
remote
is capable
of
being
programmed
to operate
most
brands
of satel_ite
receivers
and cable
boxes.This
remote
is already
programmed
to operate
RCA,
GE, and Proscan
brand
satellite
receivers.
STOP
Stops playback or recordin&
TV
Puts the remote in TV mode in order for it to operate your TMThis remote is already programmed
to operate RCA, GE, and Proscan brand satellite
receivers.This
remote is capable of being programmed to operate many brands of TVs.
VOL +/- If you r remote is capable of operating your T_, increases and decreases the volume level.
ZOOM
Enlarges the image on the screen so you can zoom in on details.To pan and scan after you've zoomed in on an image, use the arrow bu_ons.
The Zoom feature isn't available on all discs.Typically, it works with DVD discs and CDs with JPEG gles.
20
Graphics
contained
within
this publication
are for representation
only.
Need help?
Do you have a question about the GUIDEplus+ DRC8000N and is the answer not in the manual?
Questions and answers