Table of Contents
Advertisement
7. Side Accessory Assembly (Type D)
VivaCart features 15 customizable side
mounting zones on either side of the cart that
can be customized with TYPE D parts (see
"Cart Accessories", pg. 9).
To mount side accessories, choose desired
location, and use a hex screw (AA), with lock
washer (AB), and washer (AC) and secure the
accessory into the hole. hand tighten. Next,
use a hex tool (AG) to tighten the screw (see
fig. 7.1).
For side mount single hook (VC-D-SH1), side
mount triple hook (VC-D-SH3), and side mount
oxygen tank holder (VC-D-O2E), the mounting
hole is slotted for non-centered placement of
mounting screws. The movement along the
mounting zone (see fig. 7.2) allows for greater
flexibility and frees up space.
8. Removable Upper Shelf Assembly (Type E)
VivaCart features a removable top shelf (VC-E-
RTS) that helps accommodate a variety of
centrifugal pumps.
To remove, pull out the shelf until it is released
by the spring lock. When not in use, store the
removable shelf in a dry location.
To re-insert, ensure the shelf is oriented
properly and push into the cut out area until
removable shelf locks into place. Once properly
inserted, the removable shelf should be flush
with the rest of the top shelf.
LBL-81 V0
AA
Fig. 7.1 Securing mounting screws.
Fig. 7.2 Slotted mounting hole on side
mount accessories
Removable Upper Shelf
15
Side
Mounting
Zones
AB
AC
VC-E-RTS
©2023 CardioQuip, LLC
Advertisement
Table of Contents
